Kershaw Folding Knives

Maybe the Kershaw One Ton is a little too big. Maybe the Kershaw Half Ton is a little too small. Then what may be just perfect for you is the Kershaw 3/4 Ton Knife model 1446. This heavy duty knife has a stout stainless steel liner-locked blade that is attached to a glass filled nylon handle with deep finger grooves. Dual thumb studs allow you to smoothly open the blade into position. This knife carries easily on the inside of your pocket or on the outside of your pocket thanks to the low-profile pocket clip included.

• Blade length: 2.75 inches (7 cm)
• Overall length: 6.675 inches (16.8 cm)
• Blade material: 8Cr13MoV bead blasted stainless steel
• Handle material: glass filled nylon
• Weight: 3.9 oz
• In Stock: more than 10

This Kershaw 5200S satin stainless knife has a blade made of quality 420J2 stainless steel from Japan. The flashy handle is crafted from 6061-T6 anodized aluminum. The knife also has a very secure lockback. This small knife would be great for opening mail or boxes, and can be easily carried because it weighs 1.7 oz.

• In Stock: more than 10

The Kershaw Asset 1930 has a flipper on the spine that initiates the Speed Safe assisted opening. The blade is 8CR13MoV stainless steel for years of dependable use. The upswept blade provides an extended cutting surface. The handle is glass filled nylon. The textured pattern of the handle provides a sure gripping surface that lends a touch of sophistication to the overall functionality of the knife.

• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.875 inches (20 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: Glass-filled nylon
• Weight: 3.8 oz
• In Stock: more than 10

The serrated blade of the Kershaw Asset knife model 1930ST increases the cutting versatility. The blade is constructed of heat treated 8CR13MoV stainless steel that is known for its ability to take and retain an edge. The blade is quickly and smoothly opened with SpeedSafe assisted opening initiated by the integrated flipper on the spine. The glass filled nylon handle is textured for a classy look and sure grip.

• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.875 inches (20 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: Glass-filled nylon
• Weight: 3.8 oz
• In Stock: more than 10

The Kershaw Black Colt II knife model 1045 is a traditional lockback folder with an attitude. The blade is constructed of tough 8CR13MoV stainless steel for durability and reliable edge retention. The handle has aggressive finger grooves to allow you to get a good grip. The co-polymer material helps you maintain your grip in all conditions. A nylon sheath is included with the Black Colt II.

• Blade length: 3 inches (7.5 cm)
• Closed length: 4.125 inches (10.4 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: copolymer
• Weight: 3.5 oz
• In Stock: 1

When it comes to an everyday carry knife, you really can not go wrong with the Kershaw Black Gulch 3120JB. This traditional lockback knife features jigged bone inlays with cross hatch markings in the handle. These are nicely set off by polished steel bolsters. The clip point blade is 8CR13MoV stainless steel with nail nick opening. A lanyard hole has been incorporated into the butt of the Kershaw Black Gulch 3120JB.

• Blade length: 3 inches (7.6 cm)
• Overall length: 7.125 inches (20.6 cm)
• Blade material: 8CR13MOV
• Handle material: jigged bone
• Weight: 4.6 oz
• In Stock: 5

The Black Gulch 3120 from Kershaw is a trustworthy knife to have for everyday use. It is constructed of tough 8CR13MoV steel for strength and excellent edge retention. The handle has ABS inlays with a cross groove pattern which gives a firm gripping surface. The blade is a comfortable 3 inches in length and locks into place with a traditional lockback mechanism. A lanyard hole is located on the rear bolster just in case you prefer a lanyard carry.

• Blade length: 3 inches (7.6 cm)
• Overall length: 7.125 inches (20.6 cm)
• Blade material: 8CR13MOV
• Handle material: textured ABS inlay
• Weight: 4.3 oz
• In Stock: 8

A tried-and-true, simplistic design makes the Kershaw Black Horse II Camo 1060RT a dependable go-to knife. The Real Tree camouflage co-polymer handle is why it gets to hang out with the cool kids. The clip point blade is 8CR13MoV stainless that locks into place and is released with a traditional lockback. Deep finger grooves in the handle allow you to get a firm grip. The Kershaw Black Horse II Camo 1060RT is razor sharp and ready to be put to use straight out of the box.

• Blade length: 3.75 inches (9.8 cm)
• Closed length: 4.875 inches (12.5 cm)
• Blade material: 8CR13MOV
• Handle material: copolymer w/ RealTree Hardwoods Camo
• Weight: 4.6 oz
• In Stock: 1

The Kershaw Black Horse II 1060 may have been better named the Work Horse. It is one of those go-to knives that you will find yourself reaching for again and again. The timeless design has proven itself by becoming a top seller that buyers love. The lockback blade is constructed of 8CR13MoV stainless steel. The co-polymer handle has been formed with deep finger grooves for excellent gripping potential. The Black Horse II comes with a sheath for convenient carrying and storage.

• Blade material: 8CR13MOV stainless steel
• Handle material: copolymer
• Blade length: 3.75 inches (9.8 cm)
• Closed length: 4.875 inches (12.5 cm)
• Weight: 4.6 oz
• In Stock: more than 10

The Kershaw Brawler 1990 knife features a modified tanto blade with added thickness at the tip for improved puncturing capabilities. The 8Cr13MoV steel blade can be opened using SpeedSafe technology with either the dual thumbstuds or the incorporated flipper. The 4 1/8 inch handle is constructed of strong, yet lightweight glass reinforced nylon for superior grip. The Brawler 1990 is designed for right or left handed carrying in a tip up or tip down position.

• Blade material: 8CR13MOV stainless steel
• Handle material: glass filled nylon
• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.375 inches (18.7 cm)
• Weight: 3.8 oz
• In Stock: 8

The blade of the Kershaw Burst 1970 knife is constructed of 8Cr13MoV steel. It is locked into place with a strong liner lock. A ridged thumb ramp provides stability for various tasks. The handle is highly textured glass reinforced nylon that is not only highly functional, but visually pleasing. A flipper is located on the spine for fast SpeedSafe assisted opening. You can carry right handed or left handed by easily changing the reversible carrying clip. A lanyard can be attached for more carrying options.

• Blade material: 8CR13MOV
• Handle material: glass filled nylon
• Blade length: 3 inches (7.6 cm)
• Overall length: 7.125 inches (18 cm)
• Weight: 4.6 oz
• In Stock: more than 10

A flipper located on the spine allows users to quickly open the partially serrated blade of this Kershaw Burst 1970ST knife. A liner locking system ensures that the blade is safely secured while in use. 8Cr13MoV steel is used for excellent strength and edge retention. An injection molded glass reinforced nylon handle provides a solid gripping surface. The reversible pocket clip allows you to carry either left or right handed.

• Blade material: 8CR13MOV
• Handle material: glass filled nylon
• Blade length: 3 inches (7.6 cm)
• Overall length: 7.125 inches (18 cm)
• Weight: 4.6 oz
• In Stock: more than 10

An RJ Martin design, the Kershaw Chill 3410 is one smooth knife. The 410 steel frame of the handle has an overlay of G10 scales that are CNC-machined with light texturing. The drop point blade is 8Cr13MoV steel and is deployed with a flipper for one handed opening. The adjustable pocket clip allows the user to carry tip up or tip down. The sleek profile of the Kershaw Chill 3410 knife makes it a great choice for everyday carrying.

• Blade length: 3.125 (7.9 cm)
• Overall length: 7 inches (17.8 cm)
• Blade material: 8CR13MOV
• Handle material: textured G-10
• Weight: 2 oz

our price $18.99

The drop point blade of the Kershaw Clash 1605 knife is made of heat treated 8CR13MoV steel with a bead blasted finish. This powerful blade will hold an edge. The handle of the Clash is composed of polyimide with added texture for a steady gripping surface. This knife features the Kershaw Speed Safe opening system that is activated by the flipper on the back of the blade. The liner lock ensures that the blade stays in the open position. A pocket clip is included for easy carrying.

• Blade Length: 3.5 inches (8.9 cm)
• Overall Length: 7.25 inches (18.4 cm)
• Blade Material: 8CR13MoV stainless steel
• Handle Material: Polyimide
• Weight: 4 oz
• In Stock: more than 10

The Kershaw Clash model 1605CKTST features a black assisted opening partially serrated blade. The knife can be opened using the flipper on the spine. One tug on the flipper and the assisted opening system kicks in and deploys the blade in a safe manner. The blade is held open with a liner lock. The handle has textured glass filled nylon overlays for a nice compfortable grip. A pocket clip is included with the Clash that can be mounted for a tip-up or tip-down carry.

• Blade length: 3.125 inches (7.9 cm)
• Overall length: 7.375 inches (18.7 cm)
• Blade Material: 8CR13MoV stainless steel
• Handle material: glass filled nylon
• Weight: 4.3 oz
• In Stock: more than 10

Like many of the knives offered by Kershaw, the Clash 1605ST features Speed Safe opening. Push on the integrated flipper on the back of the blade, and the blade opens and locks into place with the liner lock. The partially serrated, drop point blade of the Clash 1605ST is formed of 8CR13MoV steel which has been heat treated for added strength. The Polyimide handle is light weight and helps make this 7.25 inch knife comfortable to carry at only 4 ounces. Carry it in your pocket or with the convenient pocket clip.

• Blade Length: 3.5 inches (8.9 cm)
• Overall Length: 7.25 inches (18.4 cm)
• Blade Material: 8CR13MoV stainless steel
• Handle Material: Polyimide
• Weight: 4 oz
• In Stock: 10

The Kershaw Compound Knife model 1940 has a blade design that makes it ideal for slicing. The blade is deployed by the integrated flipper with added assistance from Kershaw SpeedSafe technology. Once opened, a liner lock system is activated to keep the blade in position until the user chooses to close it. The ergonomically designed handle is glass reinforced nylon. The blade itself is constructed of strong, heat-treated 8CR10MoV steel. A carrying clip is included.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.125 inches (20.6 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: glass filled nylon
• Weight: 3.8 oz
• In Stock: 4

If you are looking for a stylish, functional knife for every day carrying, you can not go wrong with the Kershaw Corral Creek Jigged Bone model 3115JB. This traditional pocket knife has a nail nick opening with a lockback mechanism for simple closure. The knife is constructed from dependable 8CR13MoV stainless steel with stylish jigged bone overlays on the handle. This mid-sized knife is comfortable to carry in a pocket, or it can be attached to a lanyard.

• Blade length: 2.5 inches (6.3 cm)
• Overall length: 5.875 inches (14.9 cm)
• Blade material: 8CR13MOV
• Handle material: jigged bone inlay
• Weight: 2.6 oz
• In Stock: 3

The Kershaw Corral Creek 3115 is a classically stylish design. The 8Cr13MoV stainless steel blade has a satin finish that is carried over onto the handle bolsters. The handle is inlaid with cross-grooved ABS that fully complements the surrounding steel. Traditional design continues with the lockback mechanism and nail nick opening of the blade. The Kershaw Corral Creek 3115 is perfect for those who want a sophisticated upgrade to a classic design.

• Blade Length: 2.5 inches
• Overall length: 5.875 inches
• Blade material: 8CR13MOV
• Handle material: stainless steel with textured inlay
• Weight: 2.2 oz
• In Stock: 7

The Kershaw Corral Creek Wood Handle Knife 3115W is an ideal choice for everyday carrying. The blade is 8CR13MoV stainless steel with a satin polish that matches the handle bolsters. A hardwood inlay on the handle nicely finishes out this handsome design. The smaller, 2.5 inch blade length and traditional lockback of the Kershaw Corral Creek 3115W make it a reasonable knife for a variety of uses.

• Blade length: 2.5 inches (6.3 cm)
• Overall length: 5.875 inches (14.9 cm)
• Blade material: 8CR13MOV
• Handle material: hardwood inlay
• Weight: 2.4 oz
• In Stock: 3

The Kershaw Corral Creek model 3115BT features a stainless steel sheepsfoot blade. The sheepsfoot blades like the one on this knife are great for slicing, bearing down from the spine of the knife, and cutting textiles. The overall style of the Corral Creek Sheepsfoot is classic, meaning that is has two bolsters and a lockback mechanism.

• Blade Length: 3 inches (7.5 cm)
• Overall length: 7.125 inches (20.6 cm)
• Blade material: 8CR13MOV
• Handle material: stainless steel with textured inlay
• Weight: 2.7 oz
• In Stock: 1

The Kershaw Crown II 3150 is a classically elegant knife. The polished black micarta handle perfectly compliments the satin finished bolsters and 8CR13MoV blade. Dual thumbstuds allow for ambidextrous opening of the heat treated blade. A liner lock system ensures that the blade remains open when needed. A removable pocket clip provides convenient carrying options, making the Kershaw Crown II 3150 readily available for use.

• Blade length: 2.875 inches (7.3 cm)
• Overall length: 6.625 inches (16.8 cm)
• Blade material: 8CR13MOV
• Handle material: polished Micarta
• Weight: 2.6 oz
• In Stock: 1

Sleek. Stylish. Sophisticated. The Kershaw Crown 3160 knife is truly a knife for gentlemen. The 8CR13MoV steel of the blade and bolsters have a stain finish that is beautifully set off by the polished Micarta handle. The Crown 3160 is not just a good looking knife; it is also a highly functional tool. It has ambidextrous thumbstuds that allow it to be easily opened by both lefties and righties. The liner locking system ensures that the blade remains open while in use. Carrying options include utilizing the pocket clip or placing the Crown on a lanyard.

• Blade length: 3.25 inches (8.25 cm)
• Overall length: 7.5 inches (19 cm)
• Blade material: 8CR13MOV
• Handle material: polished Micarta
• Weight: 3.8 oz
• In Stock: more than 10

The Kershaw Cryo Knife 1555TI is a solidly built Rick Hinderer design. The blade is 8Cr13MoV stainless steel coated with titanium carbo-nitride. It features Speed Safe Assisted Opening that can be deployed with dual thumbstuds or the flipper. The blade locks into place with a liner lock. The handle is stainless steel with titanium carbo-nitride coating. A reversible carrying clip is included with the Kershaw Cryo 1555TI.

• Blade length: 2.75 inches (7 cm)
• Overall length: 6.5 inches (16.5 cm)
• Blade material: 8Cr13MoV, titanium carbo-nitride coating
• Handle material: Stainless steel, titanium carbo-nitride coating
• Weight: 4.5 oz
• In Stock: 6

The Kershaw Drone 1960 is an impressive knife for everyday carrying. The 8CR13MoV steel of the stonewashed clip point blade arrives ready for action. The blade retains its edge like a champ, reducing upkeep between jobs. The glass filled nylon handles provide a sturdy gripping surface while helping to reduce the overall weight of the knife. The blade opens with SpeedSafe assisted opening by way of dual thumbstuds or a flipper and locks with a liner lock. The Kershaw Drone 1960 comes with a pocket clip.

• Blade length: 2.75 inches (7 cm)
• Overall length: 6.875 inches (17.5 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: glass filled nylon
• Weight: 3.4 oz
• In Stock: 6

With SpeedSafe technology and the versatility of a partially serrated blade, the Kershaw Drone 1960ST is a knife you will be happy to carry daily. The blade is 8CR13MoV stainless steel with a stonewashed finish. Deployment of the blade is initiated with a flipper or thumbstuds. Once opened, the blade is secured in position with a liner lock. Textured glass filled nylon handles provide a lightweight, yet solid gripping surface. A reversible pocket clip is included with the Kershaw Drone 1960ST for left or right carrying.

• Blade length: 2.75 inches (7 cm)
• Overall length: 6.875 inches (17.5 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: glass filled nylon
• Weight: 3.4 oz
• In Stock: 3

The Kershaw 1880 Echelon is an original. Check out the G10 handle on this knife. This particular light green translucent color is how G10 looks in its natural form before it is colored. What makes the no-color handle look so neat with the Kershaw Echelon is that you can actually see the assisted opening mechanism inside the handle. Then to make the knife even more interesting Kershaw has removed the liners and inserted a small strip of steel inside the handle. This strip of steel serves as the liner lock to hold the knife open tight. The ambidextrous thumbstud on the knife is hollow which further adds to the one of a kind styling of the Kershaw Echelon.

• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.25 inches (18.4 cm)
• Sandvik 14C28N stainnless steel
• Handle material: machined G10
• Weight: 2.6 oz
• In Stock: more than 10

This Kershaw Ener-G flipper knife model 1740BLK has a flipper on the spine that enables you to open this knife fast, fast as an assisted opener. The design of the flipper is such that it builds up energy as you apply pressure which accelerates the blade as it opens. Once open a liner lock catches and holds the blade in place. This Kershaw 1740BLK model has a 410 stainless steel handle with G10 overlays.

• Blade length: 2.75 inches (7.5 cm)
• Overall length: 6.5 inches (17.3 cm)
• Blade material: 410 stainless steel with G10 overlays
• Blade material: Sandvik 14C28N stainless steel
• Weight: 2.6 oz

our price $54.99

The traditional gentlemans knife gets a modern update with the Kershaw G-10 Hawk 1530. The G-10 handle is lightweight, yet durable. The textured surface provides a great grip. 8CR13MoV stainless steel comprises the impressive 3 1/8 inch blade of the G-10 Hawk. Dual thumbstuds and a liner lock round out the features, making this knife a great selection for everyday carrying.

• Blade length: 3.125 inches (7.9 cm)
• Overall length: 7 inches (17.7 cm)
• Blade material: 8CR13MOV
• Handle material: Textured G-10
• Weight: 1.8 oz
• In Stock: 10

There is just something comforting about the appearance of the Kershaw Grant County 3100W that will appeal to knife collectors of all ages. Perhaps it is that the classic design is timeless, making the Grant County look like a knife your father or grandfather would have carried and passed down through the generations. The 8CR13MoV stainless construction of this beautiful lockback folder suggests that it will be around for years to come. The hardwood inlays contrast nicely with the satin polished steel finish of the bolsters to produce a knife you can be proud to keep around.

• Blade length: 1.875 inches (4.8 cm)
• Overall length: 4.5 inches (11.4 cm)
• Blade material: 8CR13MOV
• Handle material: hardwood inlay
• Weight: 1.4 oz
• In Stock: 3

The traditionally designed Grant County Jigged Bone 3100JB knife is sure to appeal to the classic knife aficionado in us all. The tried and true lockback design and smaller size of the Grant County makes it an admirable starter knife for those just learning to properly use a knife. The jigged bone overylays against the polished steel bolsters are visually stunning. The 8CR13MoV stainless construction can be depended upon to last for generations.

• Blade length: 1.875 inches (4.8 cm)
• Overall length: 4.5 inches (11.4 cm)
• Blade material: 8CR13MOV
• Handle material: jigged bone inlay
• Weight: 1.4 oz
• In Stock: 2

The Kershaw Grant County knife is about as good as it gets if you are looking for a lockback knife small enough to fit comfortably in your pocket. The Grant County has a two inch blade made of AUS6A stainless steel blade, and a zinc die cast alloy handle with a cross groved ABS inlay. Weighing only 1.2 ounces, the Kershaw Grant County is a great help for opening boxes, scraping surfaces, or just sitting back cleaning your fingernails.

• Blade length: 1.875 inches (4.8 cm)
• Overall length: 4.5 inches (11.4 cm)
• Blade material: 8CR13MOV
• Handle material: stainless steel w/ textured ABS inlay
• Weight: 1.2 oz
• In Stock: more than 10

The Kershaw Half Ton knife has a 2.5 inch blade made of 8CR13MOV stainless steel that is opened with ambidextrous thumbstuds and held in place with a liner lock. The handle is made of glass reinforced nylon with black santoprene onlays on each side. A cool looking pocket clip is mounted on the pivot end of the knife for easy carrying. What we think you will find so nice about the Kershaw Half Ton is that the price does indeed seem to be about half while having a TON of quality.

• Blade length: 2.5 inches (6.4 cm)
• Overall length: 6.125 inches (15.5 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: Glass-filled nylon with rubber inserts
• Weight: 3.3 oz
• In Stock: more than 10

The Kershaw Indian Ford 2155CF has a high carbon AUS6A stainless steel clip point blade. There is a carbon fiber inlay in the handle that is nicely set off by the satin finish of the steel. The slim design of the handle makes it comfortable to hold. The Indian Ford opens with a nail nick and locks into place with a lockback.

• Blade length: 2.675 inches
• Closed length: 3.5 inches
• Blade material: AUS6A stainless steel
• Handle material: Satin finish, Carbon Fiber inlay
• Weight: 2.7 oz
• In Stock: 3

The Kershaw Indian Ford knife, model 2155, has a high quality AUS6A stainless steel blade that is razor sharp. The blade is held by a smoth-operating lockback that is positioned at the end of the knife. The handle has high polished satin bolsters with nice looking rosewood inlays. Impress your friends when they see you carrying a classic knife such as the kershaw Indian Ford.

• Blade length: 2.675 inches
• Closed length: 3.5 inches
• Blade material: AUS6A stainless steel
• Handle material: Satin finish
• Weight: 2.7 oz
• In Stock: 3

The Kershaw Indian Ford model 2155MOP with mother of pearl inlays is a stunning knife. The classic design has a traditional nail nick and lockback for opening and securing the AUS6A blade. The handle has a satin finish that lends an extra touch of sophistication. The Indian Ford 2155MOP is 3.5 inches long and weights only 2.7 ounces.

• Blade length: 2.675 inches
• Closed length: 3.5 inches
• Blade material: AUS6A stainless steel
• Handle material: Satin finish, Mother of Pearl inlay
• Weight: 2.7 oz
• In Stock: more than 10

This Kershaw Ken Onion Baby Boa, model 1585BR, has a 440A high polished stainless steel blade. This knife also features the famous Speed Safe Ken Onion design. The red and black smoked handle is made from 6061-T6 anodized aluminum. The closed length of this Kershaw knife is 2.75 inches, and the blade is 2 inches long. The overall weight is 1.7 oz.

• In Stock: more than 10

This Kershaw Ken Onion Blackout, Model 1550, has a ti-nitride coated 440A stainless steel 3.25 inch blade with a black polyamide handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.5 oz Kershaw knife is 4.5 inches long.

• In Stock: more than 10

This Kershaw Ken Onion Blackout, Model 1550ST, has a ti-nitride coated 440A stainless steel 3.25 inch serrated blade with a black polyamide handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.5 oz Kershaw knife is 4.5 inches long.

• In Stock: 3

This Kershaw Ken Onion Whirlwind, Model 1560, has a 440A stainless steel 3.25 inch blade with a black polyamide handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.5 oz Kershaw knife is 4.5 inches long.

• In Stock: 5

This Kershaw Ken Onion Whirlwind, Model 1560ST, has a 440A stainless steel 3.25 inch serrated blade with a black polyamide handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.5 oz Kershaw knife is 4.5 inches long.

• In Stock: 7

The Kershaw Knockout model 1870 knife is built upon a unique idea, to make a big knife that is light enough to be an everyday carry. This knife comes pretty close. The Kershaw Knockout comes with a modified drop point stonewashed Sandvik 14C28N blade that is large. The handle is all aluminum except for the framelock itself. The framelock feature of this knife is where the Knockout got its name. Kershaw literally knocked out a part of the aluminum frame and replaced it with stainless steel so the blade locks securely. Essentially what this did was lighten the knife substantially by not having to use all stainless steel on a framelock knife. Then once that was done Kershaw added an assisted opening feature that can be activated using either the thumbstud on the blade of the flipper on the spine. The end result is a made-in-USA, big, light-weight,assisted-opening knife. We like this one.

• Blade material: stoned washed Sandvik 14C28N
• Handle material: aluminum with stainless steel frame lock
• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.875 inches (20 cm)
• Weight: 3.4 oz
• In Stock: more than 10

Is the Kershaw Kurai Knife 3700 a gentlemans dress knife or an everyday carrying knife? The patterned carbon-fiber and 3D sculpted aluminum handle certainly is stylish enough to be a dress knife. But, the highly functional 8Cr13MoV stainless steel blade with titanium carbo-nitride coating makes it a great knife for everyday carrying. Dual thumbstuds easily deploy the blade that is secured with a linerlock mechanism. So, dress knife, everyday carrying knife, or both? We will let you decide.

• Blade length: 2.5 inches (6.4 cm)
• Overall length: 6 inches (16.5 cm)
• Blade material: 8Cr13MoV, titanium carbo-nitride coating
• Handle material: Carbon-fiber patterned and 3-D sculpted aluminum
• Weight: 2 oz
• In Stock: 7

The all black Kershaw Kuro Tanto Knife 1835TBLKST is an eye-catching design. The glass filled nylon handle features a uniquely textured handle that makes a stylish statement. The blade is a partially serrated tanto design constructed of 8Cr13MoV stainless steel with a black oxide coating. Ambidextrous, assisted opening is made easy with the inclusion of a flipper on the back of the handle. The blade locks into place with a liner lock. Carrying options include utilizing the lanyard hole or the adjustable clip.

• Blade length: 3.125 inches (7.9 cm)
• Overall length: 7.25 inches (18.4 cm)
• Blade material: 8Cr13MoV stainless with black oxide coating
• Handle material: glass filled nylon
• Weight: 4.2 oz
• In Stock: more than 10

This Kershaw Large sheath model 1060E is constructed of heavy duty, black nylon with the Kershaw name proudly emblazoned in red. Highly functional, this sheath can be carried either vertically or horizontally, depending on the preference of the user. The 1060E sheath model can carry the larger folding knives from Kershaw like the Blur, Whirlwind, Black Horse II, Boa, Wildcat Ridge, Vapor II, Blackout, and Junk Yard Dogs.

• Overall length: 5.5 inches
• Width: 2.25 inches
• Pocket depth: 4 inches
• Sheath material: nylon
• Weight: 1 oz
• In Stock: more than 10

The Kershaw Leather Sheath model 1050L has the high quality construction customers have come to expect from Kershaw. It features premium leather with heavy duty stitching. The Kershaw name is proudly emblazoned on the front flap. It has a snap closure and a loop for horizontal carrying. The sheath accommodates Kershaw knife sizes like the Black Horse II, Wildcat Ridge, Blackout, Wirlwind, Boa, and Vapor II models.

our price $12.99

The Kershaw Blue Little Lockback 5300BL knife is a traditional everyday carry knife. The blade is a modified sheepfoot made of 8Cr13MoV steel. As the name indicates, the 2 inch blade is secured into place with a lockback mechanism. It is opened with a nail nick. The handle is blue ABS plastic with an incorporated lanyard loop that allows it to easily be attached to camping or hiking gear. With a closed length just over 2.5 inches, and weighing about an ounce, the Kershaw Little Lockback 5300BL can be quite comfortably carried in a pocket.

• Blade length: 2 inches
• Closed length: 2.675 inches
• Blade material: 8CR13MOV stainless steel
• Handle material: ABS plastic
• Weight: 1 oz
• In Stock: 8

The Kershaw Little Lockback Grey Knife model 5300GRY weighs in at 1 ounce. The total open length of the knife is just over 4.5 inches. The 2 inch sheepfoot blade is constructed of 8CR13MoV that has been brought to a satin finish. ABS plastic forms the handle of the knife, giving it a modern appearance. The blade is easily opened with a nail nick and locks into place with a traditional lockback mechanism. Although the closed length of 2.675 inches makes the Little Lockback Grey comfortable to carry, Kershaw has added a lanyard hole for additional carrying options.

• Blade length: 2 inches
• Closed length: 2.675 inches
• Blade material: 8CR13MOV stainless steel
• Handle material: ABS plastic
• Weight: 1 oz
• In Stock: 1

If you are looking for a quality, uncomplicated everyday use knife, the Kershaw Little Lockback Red 5300RD may be for you. It features a traditional lockback design with nail nick opening. The sheepfoot blade is made from proven 8Cr13MoV steel for strength and edge retention. A nod to modern design can be found in the stylish red ABS plastic handle. A lanyard loop provides additional carrying options for the Kershaw 5300RD.

• Blade length: 2 inches
• Closed length: 2.675 inches
• Blade material: 8CR13MOV stainless steel
• Handle material: ABS plastic
• Weight: 1 oz

our price $9.99

The Kershaw Nerve 3420 is designed by RJ Martin with heavy jobs in mind. The handle of the knife is fully lined with 410 steel with an overlay of CNC-machined G10 scales. The aggressive pattern in these scales, along with jimping on the thumb rest and finger guards provide the user with firm gripping capabilities. The drop point blade is constructed of 8Cr13MoV steel and is opened with dual thumbstuds. The Kershaw Nerve 3420 is ideal for those that like a strong, hefty knife for everyday use.

• Blade length: 3.125 (7.9 cm)
• Overall length: 7.5 inches (19 cm)
• Blade material: 8CR13MOV
• Handle material: textured G-10
• Weight: 3.8 oz
• In Stock: more than 10

You are looking at the Kershaw Northside Hunter knife model 1090GH. This knife makes an excellent choice to carry with you on those long hunting trips deep into the woods. The 4.5 inch stainless steel blade has an integrated gut hook and can easily cut through anything you place in its path. This makes it incredibly convenient to use when field dressing game for smooth cutting and getting the job done quickly. You will not even know your carrying the Northside Hunter knife on your trips because it only weighs 4.7 ounces! The small size of the Kershaw Northside Hunter creates the needed room for other important supplies you may be carrying with you. The black Santoprene injection molded handle prevents problems with gripping the handle while using it, even in wet conditions.

• Blade length: 4.5 inches (11.4 cm)
• Closed length: 4.875 inches (12.3 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: Injection molded Santoprene
• Weight: 4.7 oz
• In Stock: 3

Who says a hunting knife cannot be a work of art? Sure, we know that the swayback design of the 8CR13MoV stainless steel blade of the Kershaw Northside Hunter 1090 was meant to easily dress game, but it sure forms an artistically pleasing line with the hunter green injection molded santoprene handle. Beyond the appealing looks, you have the functionality of a rust resistant fine edge blade that locks securely into place with a lockback mechanism. A sheath is included with the purchase of the Kershaw Northside Hunter knife.

• Blade length: 4.5 inches (11.4 cm)
• Closed length: 4.875 inches (12.3 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: Injection molded Santoprene
• Weight: 4.7 oz
• In Stock: more than 10

The Kershaw OD-2 1770 knife has a flipper that provides smooth, one-handed opening. Once the blade is opened and locked into place with the liner lock, the flipper disappears into the liner for a clean, uninterrupted line. The blade of the OD-2 is 8Cr13MoV steel, while the handle is constructed of glass reinforced nylon. This provides a stable, non-slip gripping surface. A pocket clip is included with the OD-2 1770.

• Blade length: 2.25 inches (5.7 cm)
• Overall length: 5.25 inches (13.3 cm)
• Blade material: 8CR13MOV
• Handle material: glass filled nylon
• Weight: 1.4 oz

our price $19.99

The wide, thick blade of the Kershaw One Ton 1447 knife makes it ideal for your heavy duty tasks. The blade is 8Cr13MoV steel with dual studs. The handle is full frame stainless steel with a textured G-10 scale on the front. The back of the handle remains uncovered and houses the adjustable carrying clip. The One Ton 1447 is one big knife designed to take on tons of jobs.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.125 inches (20.6 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: Textured G-10
• Weight: 4.6 oz
• In Stock: more than 10

The Kershaw OSO Sweet knife, model 1830, has an assisted opening blade made of AUS6A stainless steel. One swipe of the lever on the spine, and the fine edge blade comes out in a hurry. The handle is made of textured glass-filled nylon that gives the knife a secure grip even in wet weather. A reversible pocket clip is included.

• Blade length: 3 inches (7.5 cm)
• Closed length: 4.125 inches (10.5 cm)
• Blade material: bead blasted 8Cr13MoV stainless steel
• Handle material: glass filled nylon
• Weight: 3 oz
• In Stock: more than 10

The Kershaw model 1665ST is the partially serrated version of the Kershaw Packrat knife. It has a 14C28N stainless steel blade with a handle that has G-10 overlays. The blade is assisted for fast opening, and is held in place by a liner lock in the handle. A reversible pocket clip is included that allows you to mount the knife tip-up or tip-down.

• In Stock: 9

The Kershaw Piston model 1860 is a larger sized knife but does not weigh more because the stainless steel liners are removed. Since the entire handle is made of G10, enough strength exists in the handle to remove the liners. Then to keep the liner lock functionality, a small stainless steel piece was installed into the handle. This moves behind the blade to keep it open tight when in use. It releases just the same as an ordinary liner lock. Another cool feature of the Kershaw Piston is that you can mount the pocket clip on four different places on the knife, resulting in four carrying options. A concealed lanyard attachment is located in the handle. This will allow you to attach your lanyard discreetly without interrupting the chiseled lines of this knife.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.5 inches (21.6 cm)
• Sandvik 14C28N stainnless steel with satin finish
• Handle material: machined G10
• Weight: 4 oz
• In Stock: 7

There is no knife like the Kershaw Rake model 1780CB. What makes this knife stand out against other wannabes is the composite blade with a curved belly. The curve in the belly makes the knife great for slashing and slicing. High quality D2 steel is on the cutting edge of the blade while reliable Sandvik 14C28N makes up the remainder of the blade structure. Textured G-10 overlays and steel liners are what the handle is made of. As far as performance, the Kershaw Rake is assisted opening with the help of both ambidextrous thumbstuds and a flipper on the spine. And even better, this knife was MADE IN THE USA.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.125 inches (20.6 cm)
• Blade material: CPM-D2 and Sandvik 14C28N
• Handle material: textured G-10
• Weight: 4.8 oz
• In Stock: 10

A production version of the widely popular Ken Onion original design, the Kershaw Random Task II 1515 has a stonewashed Sandvik 14C28N plain edge blade. The handle has textured G10 scales for added grip. Dual thumbstuds provide ambidextrous deployment of the Speed Safe assisted opening system.

• Blade material: Sandvik 14C28N with stonewashed finish
• Handle material: textured G-10
• Blade length: 3.25 inches (8.25 cm)
• Closed length: 4.5 inches (11.4 cm)
• Weight: 3.8 oz
• In Stock: more than 10

The Kershaw Random Task II 1515ST has a partially serrated Sandvik 14C28N stainless blade that is suitable for a wider variety of chores than a plain edge. Quick one-handed opening is set in motion with dual thumbstuds and completed using Kershaw SpeedSafe technology. The black, textured G10 scales provide a solid gripping surface. A reversible pocket clip is included with the Kershaw Random Task 1515ST.

• Blade material: Sandvik 14C28N with stonewashed finish
• Handle material: textured G-10
• Blade length: 3.25 inches (8.25 cm)
• Closed length: 4.5 inches (11.4 cm)
• Weight: 3.8 oz
• In Stock: more than 10

The Kershaw Ripcord 3200 uses an integrated belt clip to deploy the knife. Once deployed, the knife acts just like a fixed blade knife. The belt clip has a stud that inserts into the receiver on the Ripcord. From there you slide the knife back into the handle for storage. A great advantage about this knife is that you don't have to worry about it folding while in use. Check out our video to see the Kershaw Ripcord in action.

• In Stock: more than 10

The Kershaw RJI Serrated model 1285ST has a tanto style blade with a slight curve in the belly. Asssisted opening is featured on the RJI and can be activated using either the flipper on the back of the knife, or the ambidextrous thumbstuds. A G-10 handle gives the knife a nice and grippy feel. A pocket clip is included with the knife for carrying on your belt or on your pocket.

• Blade material: 8CR13MOV stainless steel
• Handle material: G-10
• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.125 inches (20.6 cm)
• Weight: 4.6 oz
• In Stock: 3

Enjoy fast speedsafe opening with the Kershaw RJII model 1980ST. This knife comes with a partially serrated tanto blade. The serrations on the blade are mean looking, and this is because of the two step serration that consists three points all in a row, a bridge, and then three more points. The knife is opened with either the flipper on the spine or the ambidextrous thumbstuds. The blade is held open tight with a sturdy liner lock inside the handle. The handle has a great feel thanks to the textured, machined G-10 overlays on the liner. The RJII comes with a reversible pocket clip that allows you to mount it for a tip up or tip down carry.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.125 inches (20.6 cm)
• Blade material: 8CR13MOV
• Handle material: G-10 (machined and textured)
• Weight: 4.5 oz
• In Stock: more than 10

The Kershaw Salvo 2445 has Trac-Tech inserts on the front (non-clip) sideof the handle for non-slip gripping. The back of the 410 stainless steel handle is left bare to allow you to easily slip it in and out of your pocket with ease. The three inch blade is Sandvik 14C28N steel and features dual thumb studs for smooth, one-handed opening that is convenient for both left and right handed users. The Kershaw Salvo is MADE IN THE USA.

• Blade length: 3 inches (7.6 cm)
• Overall length: 6.875 inches (17.5 cm)
• Blade material: Sandvik 14C28N
• Handle material: 410 stainless steel w/ Trac-Tec inserts
• Weight: 3.1 oz
• In Stock: 6

The Kershaw Salvo knife model 2445ST has a partially serrated 14C28N stainless steel blade. The handle is made from 410 stainless steel. The back of the handle is smooth, allowing the user to easily insert or remove it from their pocket. The front of the handle has TracTec inserts to provide non-slip gripping. Dual thumb studs allow easy opening for all users. The blade is secured in the open position using a frame lock. The included pocket clip keeps the Salvo Serrated 2445ST conveniently accessible.

• Blade length: 3 inches (7.6 cm)
• Overall length: 6.875 inches (17.5 cm)
• Blade material: Sandvik 14C28N
• Handle material: 410 stainless steel w/ Trac-Tec inserts
• Weight: 3.1 oz
• In Stock: 6

The Kershaw Select Fire 1920 is a knife with an integrated bit driver and bits. The blade is made of 8CR13MoV stainless steel for years of dependable use and edge retention. A liner lock system safely secures the blade while in use. The glass reinforced nylon handle houses the multi-position bit driver and four bits while providing a solid gripping surface. A pocket clip is included with the Select Fire 1920.

• Blade length: 3.375 inches (8.6 cm)
• Overall length: 7.625 inches (19.4 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: Glass-filled nylon
• Weight: 5.0 oz
• In Stock: 6

The Kershaw Silver Spur II knife is a larger version of the original Silver Spur. This Kershaw 2825 model has a 2.25 inch AUS6A stainless steel blade. The overall appearance of the knife is bright and vivid thanks to its silver colored aluminum handle. It will not put a large knot in your pocket either because the Silver Spur II weighs only 0.9 ounces.

• In Stock: 2

Looking for a knife that is light weight but not to small? Try out the Kershaw Silver Spur knife. This Kershaw 2800 model is over 4 inches long when open, yet it weighs only 0.6 ounces. The aluminum handle helps lighten the knife, but no quality is sacrificed on the blade thanks to its AUS6A stainless steel construction. Made in Japan.

our price $19.99

The Kershaw Skyline 1760 knife has a Sandvik 13C26 stainless-steel, stone-washed blade measuring just over three inches. The handle fits in the hand perfectly and is made from textured black G-10 which has a very secure feel. The knife can be easily opened with the thumb or index finger of either hand. The knife also comes complete with a reversible metal pocket clip. This Kershaw knife is 4.25 inches long when closed and weighs in at 2.3 oz.

• In Stock: more than 10

The Kershaw Speedform II 3550 comes shaving sharp right out of the box. The blade is made out of a material called ELMAX. ELMAX is a powdered steel that is known for its resistance to corrosion and excellent edge retention. More technically, ELMAX is also known for its low amount of non-metallic inconsistencies, its even distribution of carbides, and its ability to be hardened to 60+ on the Rockwell Hardness Scale. The Kershaw Speedform II is made and USA and you are sure to feel quality in your hands when you hold it.

• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.375 inches (18.7 cm)
• Blade material: ELMAX
• Handle material: machined G-10
• Weight: 3.2 oz
• In Stock: 9

The Kershaw Squaw Creek 2150CF is a tough little knife. It is constructed of high carbon AUS6A for durability and strength. The handle has a carbon fiber inlay surrounded by satin finish stainless steel. The blade is opened using a nail nick and secures into place with a lockback.

• Blade length: 2 inches
• Closed length: 2.675 inches
• Blade material: AUS6A stainless steel
• Handle material: Satin finish, Carbon Fiber inlay
• Weight: 1.4 oz
• In Stock: 3

The Kershaw Squaw Creek knife is a small pocket knife with a 2 inch blade. When opened this knife is just over 4 inches long. Weighing at only 1.4 ounces the Squaw Creek will not take up much room in your pocket. The blade is made of AUS6A stainless steel. The handle has satin finished bolsters with a rosewood inlay. A lockback releases and locks the blade.

• Blade length: 2 inches
• Closed length: 2.675 inches
• Blade material: AUS6A stainless steel
• Handle material: Satin finish
• Weight: 1.4 oz
• In Stock: 2

Not a lot of room in your pocket, but still need to carry a dependable knife? Consider the Kershaw Squaw Creek 2150MOP. It is just over 2.5 inches long and weighs a slight 1.4 ounces. The blade is constructed of AUS6A stainless steel and opens with a nail nick. It is locked into place with a lockback. The handle is satin finish steel with a mother of pearl inlay that makes the Kershaw Squaw Creek both functional and handsome.

• Blade length: 2 inches
• Closed length: 2.675 inches
• Blade material: AUS6A stainless steel
• Handle material: Satin finish, Mother of Pearl inlay
• Weight: 1.4 oz
• In Stock: 1

This Kershaw Tilt Stone Washed knife model 4001SW is a limited edition knife with lots of great features. It has a dual component blade that has Vanax 75 on the cutting edge, which is laminated to a 420 stainless steel core. One side of the handle is a titanium frame lock while the other site is scaled with carbon fiber. The hinge of this knife features a roller bearing that is certainly noticeable when you use the flipper on the spine. Even though the knife is a manual opener, it glides open with speed and authority. This is the only one we have in stock, and it is numbered #397.

• Blade length: 4 inches
• Closed length: 5.5 inches
• Blade material: Vanax 75 cutting edge / 420 stainless steel
• Handle material: carbon fiber / titanium
• Weight: 4.8 oz

our price $499.99

The Kershaw Torx Tool, known as the T-Tool, fits to your keychain. Unscrew the end of the tool and inside is three bits. The bits are T6, T8, and a small phillips screwdriver. The Torx Tool comes in handy for tightening screws on your Kershaw knife or small electronics that use the T6 and T8 bits. On the side of the tool is the phone number to the manufacturer, KAI USA Ltd.

• In Stock: more than 10

The Kershaw Tremor 1950 plain edge knife features Speed Safe assisted opening which is initiated by the flipper on the back of the knife. The handle is curved for a more comfortable grip. The G10 scales are textured, providing a stable gripping surface in all conditions. The blade of the Tremor 1950 is constructed of 8CR13MOV stainless steel and is 3.75 inches long. Carry with the included pocket clip or make use of the integrated lanyard hole.

• Blade length: 3.75 inches (9.5 cm)
• Overall length: 9 inches (22.9 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: G-10
• Weight: 6 oz
• In Stock: more than 10

At nine inches when in the open position, the Kershaw Tremor Serrated 1950ST is an impressively large folding knife. The partially serrated blade is heat treated 8CR13MoV stainless steel for superior edge retention. Opening the blade can be initiated by the integrated flipper or thumbstud. Either way, SpeedSafe technology takes over for smooth assisted opening. The blade is locked into position with a liner lock that easily closes with a single hand. G10 scales overlay the stainless steel liners. A clip in included for comfortable carrying.

• Blade length: 3.75 inches (9.5 cm)
• Overall length: 9 inches (22.9 cm)
• Blade material: 8CR13MOV stainless steel
• Handle material: G-10
• Weight: 6 oz
• In Stock: more than 10

The Kershaw Turbulence 1790 has a modified drop point blade with an upswept design that extends the cutting surface. It is constructed of Sandvik 14C28N stainless steel and features a stonewashed finish. The knife has SpeedSafe assisted opening that is initiated with the dual thumbstuds or the integrated flipper. The blade is secured into position with a liner lock mechanism. The handle of the Turbulence 1790 tapers somewhat toward the back. This allows better gripping of the pinky and ring fingers for better control of the knife. Black, textured G10 scales provide a steady gripping surface.

• Blade length: 3.25 inches (8.25 cm)
• Overall length: 7.75 inches (19.7 cm)
• Blade material: Stonewashed Sandvik 14C28N
• Handle material: textured G-10
• Weight: 4.4 oz
• In Stock: 10

The Kershaw Twocan is a carabiner knife that has two opposing blades that can cut independently or act as a pair of scissors. This Kershaw Twocan model 1001BL has a blue anodized aluminum handle.

• Blade material: 420J2 stainless steel
• Handle material: anodized aluminum
• Blade length: 1.5 inches
• Handle length: 2.75 inches, including carabiner
• Weight: 0.9 oz
• In Stock: 1

This red Kershaw Twocan 1001RD knife has two opposing blades that function as a pair of scissors and also cut independently. The red handle is made of anodized aluminum and the blade is made of 420J2 stainless steel. A carabiner sits on the end of the handle so you can easily hook this knife onto your gear.

• Blade material: 420J2 stainless steel
• Handle material: anodized aluminum
• Blade length: 1.5 inches
• Handle length: 2.75 inches, including carabiner
• Weight: 0.9 oz
• In Stock: 3

The Kershaw Volt II 3650CKTST features an all-black look with a partially serrated assisted opening blade. The flipper on the spine activates the assisted opening. Once open the knife is held open tight with the liner lock in the handle. The handle is textured and made of glass filled nylon. The Kershaw 3550CKTST is a versatile knife at a great price. What more could you ask for?

• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.125 inches (18 cm)
• Blade material: black oxide coated 8CR13MOV
• Handle material: glass filled nylon
• Weight: 3.3 oz
• In Stock: 7

The Kershaw Volt II 3650 knife has a bead blasted 8CR13MoV stainless steel blade. Speed Safe assisted opening technology is deployed by the flipper on the back of the knife and is secured in place with a liner lock system. A reversible pocket clip can be attached to either end of the black injection molded polyimide handle. This allows it to be carried either tip up or tip down. Jimping along the finger groove and back of the blade provide the means for a firm grip.

• Blade length: 3.125 inches (7.9 cm)
• Overall length: 7 inches (17.7 cm)
• Blade material: bead blasted 8CR13MOV
• Handle material: polyimide
• Weight: 3.4 oz
• In Stock: more than 10

The Kershaw Volt II serrated knife model 3650ST features Speed Safe assisted opening. The blade is deployed using the flipper on the back of the handle. The multi-use blade is partially serrated allowing the user to cut and saw through a variety of materials. The textured polymide handle houses a liner lock system that secures the blade when open. The reversible pocket clip allows the user to carry the knife tip up or tip down.

• Blade length: 3.125 inches (7.9 cm)
• Overall length: 7 inches (17.7 cm)
• Blade material: bead blasted 8CR13MOV
• Handle material: polyimide
• Weight: 3.4 oz
• In Stock: 2

The Kershaw Volt SS model 3655 is made completely of stainless steel. The blade is made of 8CR13MOV stainless steel, and the handle is made of 410 stainless steel. Both of the stainless steels are bead blasted for a nice uniform finish. The Kershaw Volt SS is assisted opening using the flipper on the spine of the knife. The pocket clip can be mounted in two different places thus giving you two carrying options for the knife, tip up or tip down.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 7.75 inches (19.9 cm)
• Blade material: bead blasted 8CR13MOV
• Handle material: bead blasted 410 stainless
• Weight: 4.3 oz
• In Stock: 5

The Kershaw Wild Turkey is a popular knife that has been around for a long time. Not only is it beautiful, but it also fits into the hand perfectly. The handle is nice and comfortable thanks to its satin finished bolsters and rosewood onlays. When open the Kershaw Wild Turkey is a little over six inches long. Weighing only 2.2 ounces it will not tug at your pocket.

our price $44.99

The simplistic design of the Kershaw Wildcat Ridge Jigged Bone 3140JB appeals to the traditionalist in us. The 8Cr13MoV steel of the clip point blade is built to last. There is a notched thumb rest along the ridge of the blade that provides a stabilizing grip. The bolsters of the handle contrasts beautifully with the jigged bone inlay. The blade is accessed with a traditional nail nick and is closed by pressing the lockback mechanism. A leather case is included with the Wildcat Ridge 3140JB.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.375 inches (21.3 cm)
• Blade material: 8CR13MOV
• Handle material: stainless steel w/ jigged bone inlay
• Weight: 7.6 oz
• In Stock: 2

The cross-grooved ABS inlay on the handle of the Kershaw Wildcat Ridge 3140 knife adds a touch of modern design to its traditional class. The blade is 8Cr13MoV stainless steel. The handle frame is dependable, fully lined stainless steel. The blade opens with a nail nick and is secured in place with a lockback. The Kershaw Wildcat Ridge 3140 is truly a working knife that you can depend upon day in and day out.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.375 inches (21.3 cm)
• Blade material: 8CR13MOV
• Handle material: stainless steel w/ textured inlay
• Weight: 4.3 oz
• In Stock: 5

For those who like a pocketknife with a little meat on its bones, Kershaw has this Wildcat Ridge model 3140W. This traditionally designed knife is tough. From the 8CR13MoV stainless steel blade to the stainless handle with hardwood inlay, you will enjoy the dependable sturdiness of the Wildcat Ridge for years to come. It features the tried and true nail nick and lockback design, and it comes complete with a leather sheath for carrying and storage.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.375 inches (21.3 cm)
• Blade material: 8CR13MOV
• Handle material: stainless steel w/ hardwood inlay
• Weight: 7.2 oz
• In Stock: 2

The Kershaw Zing 1735T knife has a high quality Sandvik 14C28N stainless steel 3 inch tanto blade. The handle is constructed of textured injection molded overlays on stainless steel liners. The texture serves well to make sure your grip does not slip. The Kershaw Zing Tanto can be opened two ways. One way is by using the ambidextrous thumbstuds. The other way is to use the flipper on the back to open the blade in a flash. This knife is affordable and MADE IN THE USA.

• In Stock: 1

This Kershaw 1735TST serrated Zing Tanto knife is made in the USA. It has a Sandvik 14C28N stainless steel blade that is partially serrated so you get the best of both worlds. The handle is textured injection mold for great gripping power. There is a flipper on the back of the knife that allows you to deploy the blade fast. For a little slower opening you can use the ambidextrous thumbstuds mounted on the blade.

• In Stock: 3