{"id":231,"date":"2013-04-03T21:08:12","date_gmt":"2013-04-04T02:08:12","guid":{"rendered":"http:\/\/www.kershaw-knives.net\/blog\/?p=231"},"modified":"2013-05-21T08:18:39","modified_gmt":"2013-05-21T13:18:39","slug":"kershaw-t-tool","status":"publish","type":"post","link":"https:\/\/www.kershaw-knives.net\/blog\/kershaw-t-tool","title":{"rendered":"Using Kershaw T-Tool Torx Tool to Reverse Pocket Clip"},"content":{"rendered":"

Today we decided to shoot a little video that demonstrates how useful a Kershaw T-Tool<\/a> is when it comes to working on your Kershaw knife. The T-Tool is designed to help you work on your Kershaw knife easily. The tool comes with three bits: a T6 driver, a T10 driver, and a phillips screwdriver head. These three bits are stored securely into the shaft of the T-Tool and enable you to make adjustments to most Kershaw knives.<\/p>\n

\"Kershaw<\/a><\/p>\n

For this video we swapped the pocket clip on a Kershaw Leek 1660<\/a> from one end of the knife to the other. Before the pocket clip was swapped the configuration of the knife was what is known as a “tip down” carry. After the pocket clip was swapped the configuration became what is now as a “tip up” carry. Both carry configurations have their advantages and disadvantages, and it really comes down to a matter of personal preference. Lots of people like the tip down carry for safety. Others like tip up carry for faster draws.<\/p>\n

Knurling<\/b> – The textured checkering along the shaft of the T-Tool is known as knurling. This knurling doesn’t just allow you to give the Kershaw T-Tool torque when tightening or loosening screws, but it also gives you a good sense of just how much you are bearing down on the screw heads. This reduces over-torquing and stripped screw threads.<\/p>\n

Magnetic receptable<\/b> – The head of the Kershaw T-Tool has a magnetic head. This allows you to retain the bits in the head even when holding the tool upside down or between applications.<\/p>\n

The bottom line is this. The Kershaw T-Tool<\/a> will allow you to make quick adjustments to your knife because the bits inside are exactly what your Kershaw needs. I hope you like the video.<\/p>\n