Kershaw-Knives.net Blog

Kershaw-Knives.net Facebook











Tell a friend about Kershaw-Knives.net

Zero Tolerance Knives

Zero Tolerance Knives


800.458.1606     Kershaw-Knives.net CART  Kershaw Checkout  




Kershaw Zero Tolerance 0350SW

Kershaw Zero Tolerance 0350TSST

Kershaw Zero Tolerance 0560 Rick Hinderer Knife

Kershaw Zero Tolerance Bayonet ZT-9

Kershaw Zero Tolerance Black Sheath

Kershaw Zero Tolerance Black Talon Knife 0750

Kershaw Zero Tolerance Fixed Blade Combat Knife 0170

Kershaw Zero Tolerance Foliage Green Sheath

Kershaw Zero Tolerance Knife 0300 Combat

Kershaw Zero Tolerance Knife 0300ST

Kershaw Zero Tolerance Knife 0301 Ranger

Kershaw Zero Tolerance Knife 0301ST Ranger Serrated

Kershaw Zero Tolerance Knife 0350

Kershaw Zero Tolerance Knife 0350ST

Kershaw Zero Tolerance Military Folder Knife 0200

Kershaw Zero Tolerance Military Folder Knife 0200ST

Kershaw Zero Tolerance Military Knife 0100

Kershaw Zero Tolerance Ranger Knife 0121

Kershaw Zero Tolerance Rick Hinderer Knife 0550

Kershaw Zero Tolerance Rick Hinderer Knife 0561

Kershaw Zero Tolerance Shifter Fixed Blade Knife 0160

Kershaw Zero Tolerance Shroud Cutter Tan JB1

Kershaw Zero Tolerance TigerStripe Knife 0350TS

Kershaw Zero Tolerance Wide Blade Tanto Folder 0700


24 different Zero Tolerance Knives to choose from



Kershaw Zero Tolerance 0350SW
Kershaw Zero Tolerance 0350SW
The Kershaw Zero Tolerance 0350SW knife has a stonewashed S30V blade. A quad-mount pocketclip allows you to mount this knife in tip up, tip down, left-hand, or right-hand operation. It employs the SpeedSafe assisted opening system to get the blade out in a hurry. Textured black G-10 on the handle gives you the standard tight grip in wet and dry conditions.
  • Blade material: S30V stonwashed
  • Handle material: Black textured G-10
  • Blade length: 3 1/4 inches (8.25 cm)
  • Closed length: 4 5/8 inches (11.75 cm)
  • Weight: 5.6 oz
  • In Stock: 7

retail $175.00
our price $140.00
Kershaw Zero Tolerance 0350SW
Kershaw Zero Tolerance 0350TSST
Kershaw Zero Tolerance 0350TSST
Zero Tolerance 0350TSST is a Tiger Stripe Finish serrated blade. It has the SpeedSafeŽ for one-handed assisted opening with the large, ambidextrous thumb stud or blade protrusion. The blade is S30V stainless steel with the black Tungsten DLC which is non-reflective, enhances hardness, and reduces friction drag. The handle has textured, matte- BLACK G-10 scales to provide a secure grip. A quad mounting system for tip-up, tip-down, left- or right-handed clip carry is available for you to choose how to assemble the pocket clip.
  • Blade material: TigerStripe Tungsten DLC coated S30V stainless steel
  • Handle material: Black textured G-10
  • Blade length: 3 1/4 inches (8.25 cm)
  • Closed length: 4 5/8 inches (11.75 cm)
  • Weight: 6.2 oz
  • In Stock: more than 10

retail $185.00
our price $148.00
Kershaw Zero Tolerance 0350TSST
Kershaw Zero Tolerance 0560 Rick Hinderer Knife
Kershaw Zero Tolerance 0560 Rick Hinderer Knife
The Kershaw ZT Hinderer 0560 knife has a corrosion resistant, wear resistant ELMAX powdered steel blade in a stonewashed finish. The handle is titanium that has a stonewashed, 3D machined pattern on the back and a matching black, G-10 3D machined scale on the front. The handle has a generous finger guard and grip. Ridges along the top of the handle extend into the blade for greater control of the knife. The blade is opened with the flipper or dual thumb studs. A KVT ball bearing system ensures smooth, fast deployment. The Kershaw Zero Tolerance Hinderer 0560 comes with a deep carry pocket clip that allows for left or right carrying with the tip up or down.
  • Blade material: ELMAX w/ stonwashed finish
  • Handle material: Textured G-10, machined titanium
  • Blade length: 3.75 inches (9.5 cm)
  • Overall length: 8.8 inches (22.4 cm)
  • Weight: 5.8 oz
  • In Stock: more than 10

retail $325.00
our price $260.00
Kershaw Zero Tolerance 0560 Rick Hinderer Knife
Kershaw Zero Tolerance Bayonet ZT-9
Kershaw Zero Tolerance Bayonet ZT-9
This Kershaw Zero Tolerance Bayonet model ZT-9 is built from a full tang, 0.25 inch thick piece of S30V stainless steel. The handle is made of textured G10 to give you good grip even when it is wet. A high-impact polymer sheath is included that can allow the bayonet to be mounted in an up or down position.
  • Blade material: stoned washed S30V stainless steel
  • Handle material: textured G10, ranger green color
  • Blade length: 7.5 inches (19 cm)
  • Overall length: 12.3 inches (31.27 cm)
  • Weight: 19.4 oz
  • In Stock: 9

retail $399.00
our price $319.20
Kershaw Zero Tolerance Bayonet ZT-9

Kershaw Zero Tolerance Black Sheath
Kershaw Zero Tolerance Black Sheath
This black ballistic nylon sheath was design specifically for the Kershaw Zero Tolerance folding knives. This sheath is a geniune Zero Tolerance brand and fits on your belt loop with a snap. The front of the sheath has the Zero Tolerance logo and a flap that is secured with velcro.
  • Sheath material: ballistic nylon
  • Sheath length: 5.5 inches
  • Sheath width: 2 inches
  • Sheath color: black
  • Weight: 1.4 oz
  • In Stock: 9

retail $22.00
our price $17.60
Kershaw Zero Tolerance Black Sheath
Kershaw Zero Tolerance Black Talon Knife 0750
Kershaw Zero Tolerance Black Talon Knife 0750
The Kershaw Zero Tolerance Black Talon has a hawkbill blade that enables the user to do special tasks like making long continuous cuts through fabrics like canvas and carpet. The blade is made of hard S30V steel and is assisted opening. The handle is made of textured G10 that has grip even in wet conditions.
  • Blade material: S30V
  • Handle material: Textured G-10
  • Blade length: 3.2 inches (8.1 cm)
  • Overall length: 7.25 inches (18.4 cm)
  • Weight: 3.7 oz
  • In Stock: 9

retail $170.00
our price $136.00
Kershaw Zero Tolerance Black Talon Knife 0750
Kershaw Zero Tolerance Fixed Blade Combat Knife 0170
Kershaw Zero Tolerance Fixed Blade Combat Knife 0170
This Kershaw Zero Tolerance Combat Knife 0170 has a 5.7 inch fixed blade. A Tungsten DLC coating has been applied over the durable 14C28N steel to give it a tactical non-reflective quality. The handle of the 0170 is matte black G10 that has been 3D machined to provide a superior gripping surface. The overall length is 11.5 inches, and it weighs in at 11 ounces. A Kydex sheath is included with the 0170.
  • Blade material: 14C28N stainless steel
  • Handle material: G10
  • Blade length: 5.7 inches (14.4 cm)
  • Overall length: 11.5 inches (29.2 cm)
  • Weight: 11 oz
  • In Stock: 2

retail $195.00
our price $156.00
Kershaw Zero Tolerance Fixed Blade Combat Knife 0170
Kershaw Zero Tolerance Foliage Green Sheath
Kershaw Zero Tolerance Foliage Green Sheath
This Kershaw Zero Tolerance foliage green colored sheath was designed to perfectly fit the Zero Tolerance folding knives. A wide velcro attachment holds down the flap on the sheath, and the belt clip on the back can be snapped on your belt. The snap comes in handy because you do not have to worry about feeding a belt through it. Just snap the sheath around whatever you want to attach it to and you are done. This sheath is made of ballistic nylon.
  • Sheath material: ballistic nylon
  • Sheath length: 5.5 inches
  • Sheath width: 2 inches
  • Sheath color: foliage green
  • Weight: 1.4 oz
  • In Stock: 10

retail $22.00
our price $17.60
Kershaw Zero Tolerance Foliage Green Sheath

Kershaw Zero Tolerance Knife 0300 Combat
Kershaw Zero Tolerance Knife 0300 Combat
The Kershaw Zero Tolerance combat folder model 0300 has a big S30V stainless steel blade that is assisted opening. The blade has a black tungsten dlc coating to reduce friction drag and enhance corrosion resistance. The handle is made of G-10 and has scales on it for even better grip. The blade uses a hex nut at the pivot to make it easy to adjust in the field using common tools. The Kershaw Zero Tolerance 0300 comes with a pocket clip that can be mounted in four places, tip up or town, left-handed or right-handed. MADE IN THE USA.
  • Blade material: Tungsten DLC coated S30V stainless steel
  • Handle material: Titanium with texured G10 overlay
  • Blade length: 3.75 inches (9.5 cm)
  • Overall length: 8.5 inches (21.6 cm)
  • Weight: 8 oz
  • In Stock: 10

retail $340.00
our price $272.00
Kershaw Zero Tolerance Knife 0300 Combat
Kershaw Zero Tolerance Knife 0300ST
Kershaw Zero Tolerance Knife 0300ST
The Kershaw Zero Tolerance 0300ST combat folder knife has a partially serrated S30V blade with a tungsten dlc coating. The tungsten dlc gives it the distinctive blade non-reflective look and helps with corrosion resistance. This knife is assisted opening and can be deployed using either the ambidextrous thumbstuds or the flipper on the back of the handle. The handle has 3D machined textured G-10 for excellent gripping power. This knife is MADE IN THE USA.
  • Blade material: Tungsten DLC coated S30V stainless steel
  • Handle material: Titanium with texured G10 overlay
  • Blade length: 3.75 inches (9.5 cm)
  • Overall length: 8.5 inches (21.6 cm)
  • Weight: 8 oz
  • In Stock: more than 10

retail $340.00
our price $272.00
Kershaw Zero Tolerance Knife 0300ST
Kershaw Zero Tolerance Knife 0301 Ranger
Kershaw Zero Tolerance Knife 0301 Ranger
The ranger green version of the Kershaw Zero Tolerance combat folder line has a green G-10 handle with textured scales. The S30V blade is assisted opening and has a striped camouflage pattern on top of a tungsten dlc coating. The ambidextrous thumbstuds and flipper on the spine are oversized a little so you can deploy the blade even when you have gloves on. This Kershaw Zero Tolerance 0301 model has a quad pocket clip mounting system, meaning that you can mount the clip on either side of the knife, tip up or tip down.
  • Blade material: Striped tungsten DLC coated S30V stainless steel
  • Handle material: Ranger green texured G-10 overlay
  • Blade length: 3.75 inches (9.5 cm)
  • Closed length: 5.25 inches (13.3 cm)
  • Weight: 8.6 oz
  • In Stock: 10

retail $340.00
our price $272.00
Kershaw Zero Tolerance Knife 0301 Ranger
Kershaw Zero Tolerance Knife 0301ST Ranger Serrated
Kershaw Zero Tolerance Knife 0301ST Ranger Serrated
The Zero Tolerance 0301ST by Kershaw is a tough knife, and it shows. The partially serrated S30V stainless steel blade has been coated with Tungsten DLC in a tiger stripe pattern that stands up to the triple threat of dulling, wearing, and corroding. The handle has a Ranger green G-10 overlay that is deeply textured for ultra superior gripping. A generous finger guard and a thumb rest along the top of the handle allow you to choke up on the knife for added control. The Kershaw Zero Tolerance 0301ST has SpeedSafe opening technology. Enjoy single handed, ambidextrous opening via the dual thumb studs or the flipper. A removable, reversible carrying clip is included.
  • Blade material: Striped tungsten DLC coated S30V stainless steel
  • Handle material: Ranger green texured G-10 overlay
  • Blade length: 3.75 inches (9.5 cm)
  • Closed length: 5.25 inches (13.3 cm)
  • Weight: 8.6 oz
  • In Stock: 5

retail $340.00
our price $272.00
Kershaw Zero Tolerance Knife 0301ST Ranger Serrated

Kershaw Zero Tolerance Knife 0350
Kershaw Zero Tolerance Knife 0350
The Kershaw Zero Tolerance knife model 0350 is 10 percent smaller than the 0300 knife. This folding knife is assisted opening which is activated by using either the thumbstud or the flipper on the back of the handle. The blade is made of S30V steel and is coated in tungsten dlc. The handle is textured G-10 for good grip even in wet conditions. The pocket clip can be mounted on four places on the handle, giving you the option of carrying the knife tip up, tip down, left, or right.
  • Blade material: Tungsten DLC coated S30V stainless steel
  • Handle material: Black textured G-10
  • Blade length: 3 1/4 inches (8.25 cm)
  • Closed length: 4 5/8 inches (11.75 cm)
  • Weight: 6.2 oz
  • In Stock: 8

retail $175.00
our price $140.00
Kershaw Zero Tolerance Knife 0350
Kershaw Zero Tolerance Knife 0350ST
Kershaw Zero Tolerance Knife 0350ST
The Kershaw Zero Tolerance 0350ST knife is a tad bit smaller and lighter than the full blown model 0300. It has a partially serrated S30V blade and a G-10 handle that is textured on both sides. This knife is assisted opening and can be opened using either the ambidextrous thumbstuds or the blade protrusion on the back. The thumbstuds and the protrusion are enlarged a little so you can easily open the knife even when you are wearing gloves. A tungsten dlc coating is on the blade that helps with reducing corrosion and friction drag. The Kershaw Zero Tolerance 0350ST knfie is MADE IN THE USA.
  • Blade material: Tungsten DLC coated S30V stainless steel
  • Handle material: Black textured G-10
  • Blade length: 3 1/4 inches (8.25 cm)
  • Closed length: 4 5/8 inches (11.75 cm)
  • Weight: 6.2 oz
  • In Stock: 7

retail $175.00
our price $140.00
Kershaw Zero Tolerance Knife 0350ST
Kershaw Zero Tolerance Military Folder Knife 0200
Kershaw Zero Tolerance Military Folder Knife 0200
The Kershaw Zero Tolerance 0200 is the Military Folder knife. It has a 154CM stainless steel blade that is coated in Tungsten DLC. The blade has a recurve shape to it and a point that is perfectly centered with the handle. The 0200 can be opened with one hand using either the flipper on the back or the ambidextrous thumbstuds on the blade. A liner lock holds and releases the blade. The handle is made of 3D machined G-10 for good grip.
  • Blade material: Tungsten DLC coated 154CM stainless steel
  • Handle material: 3D machined G-10
  • Blade length: 3 7/8 inches (9.8 cm)
  • Closed length: 5.25 inches (13.3 cm)
  • Weight: 7.7 oz
  • In Stock: 7

retail $200.00
our price $160.00
Kershaw Zero Tolerance Military Folder Knife 0200
Kershaw Zero Tolerance Military Folder Knife 0200ST
Kershaw Zero Tolerance Military Folder Knife 0200ST
The Kershaw Zero Tolerance model 0200ST is a non-assisted, partially serrated Military Folder knife. Is has a high quality 154CM stainless steel blade that is coated in Tungsten DLC. With a little practice one can open this knife swiftly with one hand. The handle has G10 overlays for good grip, and a liner lock holds and releases the blade.
  • Blade material: Tungsten DLC coated 154CM stainless steel
  • Handle material: 3D machined G-10
  • Blade length: 3 7/8 inches (9.8 cm)
  • Closed length: 5.25 inches (13.3 cm)
  • Weight: 7.7 oz
  • In Stock: 7

retail $200.00
our price $160.00
Kershaw Zero Tolerance Military Folder Knife 0200ST

Kershaw Zero Tolerance Military Knife 0100
Kershaw Zero Tolerance Military Knife 0100
The Kershaw Zero Tolerance military knife model 0100 has a recurve shaped blade that is designed for minimal mass. The point of the knife is centered perfectly for piercing, and its CPM3V tool steel construction prevents against chipping and breaking from impact. A tungsten dlc coating has been applied to the blade to give it a non-reflective look while reducing friction and corrosion. The handle is made of 3D machine G10 for maximum grip even in wet conditions. A sheath is included that allows you to mount the knife in a variety of different configurations.
  • Blade material: Tunsten DLC coated CPM3V tool steel
  • Handle material: 3D machined G-10
  • Blade length: 5.75 inches (13.6 cm)
  • Overall length: 10.5 inches (26.7 cm)
  • Weight: 11.4 oz
  • In Stock: 5

retail $360.00
our price $288.00
Kershaw Zero Tolerance Military Knife 0100
Kershaw Zero Tolerance Ranger Knife 0121
Kershaw Zero Tolerance Ranger Knife 0121
The Kershaw Zero Tolerance model 0121 is a full-tang, fixed-blade military knife with an S30V stainless steel blade. A tungsten dlc coating covers the blade making it non-reflective and corrosion resistant. A cord cutter is located in the choil of the blade thus making sure it is out of the way, yet easy to get to. The ranger green handle is made from textured G-10 and has a lanyard hole drilled in the end. A Kydex sheath comes with the Kershaw 0121 that is MOLLE compatible, making the knife able to be carried in different configurations.
  • Blade material: Tungsten DLC coated S30V stainless steel
  • Handle material: Texured G10 overlay
  • Blade length: 4 1/4 inches (10.8 cm)
  • Overall length: 8 inches (20.3 cm)
  • Weight: 9.1 oz
  • In Stock: 3

our price $228.00
Kershaw Zero Tolerance Ranger Knife 0121
Kershaw Zero Tolerance Rick Hinderer Knife 0550
Kershaw Zero Tolerance Rick Hinderer Knife 0550
The blade of the Kershaw Zero Tolerance Rick Hinderer 0550 knife is stonewashed S35VN, which is highly resistant to wear and chipping. Opening this impressive blade is convenient with the use of dual thumb studs. The blade secures with a frame lock. The handle material is G-10 and is textured for increased gripping power. The Zero Tolerance Rick Hinderer 0550 has top quality materials and durable design to take use and abuse for years. Carry it proudly tip up or tip down, right handed or left handed.
  • Blade material: S35VN
  • Handle material: Textured G-10
  • Blade length: 3.5 inches (8.8 cm)
  • Overall length: 8.125 inches (20.6 cm)
  • Weight: 5.8 oz
  • In Stock: 9

retail $250.00
our price $200.00
Kershaw Zero Tolerance Rick Hinderer Knife 0550
Kershaw Zero Tolerance Rick Hinderer Knife 0561
Kershaw Zero Tolerance Rick Hinderer Knife 0561
This Kershaw Zero Tolerance Rick Hinderer model 0561 is about as perfect as a knife can get. With a desert sand colored G10 grip on one side, and a machined titanium grip on the other, this knife looks cool and unique at the same time. The pocket clip on the handle is able to be mounted on four sides: left, right, tip up, tip down. The blade is made from a material called ELMAX wish has high resistance to wear and corrosion. The blade is opened using either the ambidextrous thumbstuds or the flipper on the spine. Inside the hinge of this knife is roller bears which help the blade open smooth and fast.
  • Blade material: ELMAX w/ stonwashed finish
  • Handle material: Textured G-10, machined titanium
  • Blade length: 3.75 inches (9.5 cm)
  • Overall length: 8.8 inches (22.4 cm)
  • Weight: 5.8 oz
  • In Stock: more than 10

retail $325.00
our price $260.00
Kershaw Zero Tolerance Rick Hinderer Knife 0561

Kershaw Zero Tolerance Shifter Fixed Blade Knife 0160
Kershaw Zero Tolerance Shifter Fixed Blade Knife 0160
The Kershaw Zero Tolerance Shifter knife model 0160 is a full tang, fixed blade combat knife. The 5 inch blade has Tungsten DLC coating over 14C28N steel. The handle has textured G-10 scales suitable for all weather conditions, including extreme temperatures. Finger grooves in the handle and ridges along the tang provide added stability to your grip. The overall length of the 0160 is 10 inches with a weight of 8 ounces. It comes with a Kydex sheath.
  • Blade material: Tungsten DLC coated 14C28N
  • Handle material: G10, 3D machined
  • Blade length: 5 inches (12.7 cm)
  • Overall length: 10 inches (25.4 cm)
  • Weight: 8 oz
  • In Stock: 5

retail $175.00
our price $140.00
Kershaw Zero Tolerance Shifter Fixed Blade Knife 0160
Kershaw Zero Tolerance Shroud Cutter Tan JB1
Kershaw Zero Tolerance Shroud Cutter Tan JB1
The Zero Tolerance Shroud Cutter model JB1 from weighs only 2.4 ounces, making it a lightweight addition to your gear. It is constructed of 154CM stainless steel with an overlay of matte black Tungsten DLC. A 270 degree unexposed cutting surface with a .34 inch opening easily cuts through cording, rope, or clothing, and many other materials. Notches for your index finger and thumb stabilize help stabilize the tool as you work. Oxygen wrench cutouts are integrated into the handle. This model comes complete with a MOLLE compatible ballistic nylon sheath.
  • Blade material: Sandvik 14C28N w/ tungsten dlc coating
  • Handle material: Sandvik 14C28N w/ tungsten dlc coating
  • Overall length: 6 inches
  • Glass breaker material: carbide
  • Weight: 2.4 oz
  • In Stock: 1

our price $53.33
Kershaw Zero Tolerance Shroud Cutter Tan JB1
Kershaw Zero Tolerance TigerStripe Knife 0350TS
Kershaw Zero Tolerance TigerStripe Knife 0350TS
The Kershaw Zero Tolerance 0350TS has a black textured G10 handle to keep a firm grip. The blade is S30V stainless steel, proven for its durability and resistance to wear and corrosion. A Tungsten DLC coating has been applied in a distinct tiger stripe pattern to provide additional blade hardness. The blade has SpeedSafe assisted opening that can be initialized with the ambidextrous thumbstuds or the convenient flipper. The Kershaw Zero Tolerance 0350TS comes with a pocket clip that mounts four ways for right or left carrying in tip up or tip down position.
  • Blade material: TigerStripe Tungsten DLC coated S30V stainless steel
  • Handle material: Black textured G-10
  • Blade length: 3 1/4 inches (8.25 cm)
  • Closed length: 4 5/8 inches (11.75 cm)
  • Weight: 6.2 oz
  • In Stock: 10

retail $185.00
our price $148.00
Kershaw Zero Tolerance TigerStripe Knife 0350TS
Kershaw Zero Tolerance Wide Blade Tanto Folder 0700
Kershaw Zero Tolerance Wide Blade Tanto Folder 0700
The Kershaw Zero Tolerance 0700 features an extra wide tanto blade constructed of S30V steel with a stonewashed finish. The integrated flipper makes opening the blade a cinch. The weight of the blade is offset by the lightweight G10 scales. This reduces the total weight to an easily managed 4.2 ounces. The Kershaw ZT 0700 comes with a reversible pocket clip.
  • Blade material: stonewashed S30V
  • Handle material: Textured G-10
  • Blade length: 3.5 inches (8.8 cm)
  • Overall length: 8.125 inches (20.6 cm)
  • Weight: 4.2 oz
  • In Stock: more than 10

retail $170.00
our price $136.00
Kershaw Zero Tolerance Wide Blade Tanto Folder 0700

Copyright © 2014 Two Point Enterprise, LLC
Phone: 800.458.1606 (sales)