Zero Tolerance Knives

The Kershaw Zero Tolerance 0350SW knife has a stonewashed S30V blade. A quad-mount pocketclip allows you to mount this knife in tip up, tip down, left-hand, or right-hand operation. It employs the SpeedSafe assisted opening system to get the blade out in a hurry. Textured black G-10 on the handle gives you the standard tight grip in wet and dry conditions.

• Blade material: S30V stonwashed
• Handle material: Black textured G-10
• Blade length: 3 1/4 inches (8.25 cm)
• Closed length: 4 5/8 inches (11.75 cm)
• Weight: 5.6 oz
• In Stock: 6

Zero Tolerance 0350TSST is a Tiger Stripe Finish serrated blade. It has the SpeedSafe® for one-handed assisted opening with the large, ambidextrous thumb stud or blade protrusion. The blade is S30V stainless steel with the black Tungsten DLC which is non-reflective, enhances hardness, and reduces friction drag. The handle has textured, matte- BLACK G-10 scales to provide a secure grip. A quad mounting system for tip-up, tip-down, left- or right-handed clip carry is available for you to choose how to assemble the pocket clip.

• Blade material: TigerStripe Tungsten DLC coated S30V stainless steel
• Handle material: Black textured G-10
• Blade length: 3 1/4 inches (8.25 cm)
• Closed length: 4 5/8 inches (11.75 cm)
• Weight: 6.2 oz
• In Stock: 6

The Kershaw ZT Hinderer 0560 knife has a corrosion resistant, wear resistant ELMAX powdered steel blade in a stonewashed finish. The handle is titanium that has a stonewashed, 3D machined pattern on the back and a matching black, G-10 3D machined scale on the front. The handle has a generous finger guard and grip. Ridges along the top of the handle extend into the blade for greater control of the knife. The blade is opened with the flipper or dual thumb studs. A KVT ball bearing system ensures smooth, fast deployment. The Kershaw Zero Tolerance Hinderer 0560 comes with a deep carry pocket clip that allows for left or right carrying with the tip up or down.

• Blade material: ELMAX w/ stonwashed finish
• Handle material: Textured G-10, machined titanium
• Blade length: 3.75 inches (9.5 cm)
• Overall length: 8.8 inches (22.4 cm)
• Weight: 5.8 oz
• In Stock: 1

This black ballistic nylon sheath was design specifically for the Kershaw Zero Tolerance folding knives. This sheath is a geniune Zero Tolerance brand and fits on your belt loop with a snap. The front of the sheath has the Zero Tolerance logo and a flap that is secured with velcro.

• Sheath material: ballistic nylon
• Sheath length: 5.5 inches
• Sheath width: 2 inches
• Sheath color: black
• Weight: 1.4 oz
• In Stock: more than 10

The Kershaw Zero Tolerance knife model 0350 is 10 percent smaller than the 0300 knife. This folding knife is assisted opening which is activated by using either the thumbstud or the flipper on the back of the handle. The blade is made of S30V steel and is coated in tungsten dlc. The handle is textured G-10 for good grip even in wet conditions. The pocket clip can be mounted on four places on the handle, giving you the option of carrying the knife tip up, tip down, left, or right.

• Blade material: Tungsten DLC coated S30V stainless steel
• Handle material: Black textured G-10
• Blade length: 3 1/4 inches (8.25 cm)
• Closed length: 4 5/8 inches (11.75 cm)
• Weight: 6.2 oz
• In Stock: 5

The Kershaw Zero Tolerance 0350ST knife is a tad bit smaller and lighter than the full blown model 0300. It has a partially serrated S30V blade and a G-10 handle that is textured on both sides. This knife is assisted opening and can be opened using either the ambidextrous thumbstuds or the blade protrusion on the back. The thumbstuds and the protrusion are enlarged a little so you can easily open the knife even when you are wearing gloves. A tungsten dlc coating is on the blade that helps with reducing corrosion and friction drag. The Kershaw Zero Tolerance 0350ST knfie is MADE IN THE USA.

• Blade material: Tungsten DLC coated S30V stainless steel
• Handle material: Black textured G-10
• Blade length: 3 1/4 inches (8.25 cm)
• Closed length: 4 5/8 inches (11.75 cm)
• Weight: 6.2 oz
• In Stock: 6

The Zero Tolerance Shroud Cutter model JB1 from weighs only 2.4 ounces, making it a lightweight addition to your gear. It is constructed of 154CM stainless steel with an overlay of matte black Tungsten DLC. A 270 degree unexposed cutting surface with a .34 inch opening easily cuts through cording, rope, or clothing, and many other materials. Notches for your index finger and thumb stabilize help stabilize the tool as you work. Oxygen wrench cutouts are integrated into the handle. This model comes complete with a MOLLE compatible ballistic nylon sheath.

• Blade material: Sandvik 14C28N w/ tungsten dlc coating
• Handle material: Sandvik 14C28N w/ tungsten dlc coating
• Overall length: 6 inches
• Glass breaker material: carbide
• Weight: 2.4 oz
• In Stock: 1

The Kershaw Zero Tolerance 0350TS has a black textured G10 handle to keep a firm grip. The blade is S30V stainless steel, proven for its durability and resistance to wear and corrosion. A Tungsten DLC coating has been applied in a distinct tiger stripe pattern to provide additional blade hardness. The blade has SpeedSafe assisted opening that can be initialized with the ambidextrous thumbstuds or the convenient flipper. The Kershaw Zero Tolerance 0350TS comes with a pocket clip that mounts four ways for right or left carrying in tip up or tip down position.

• Blade material: TigerStripe Tungsten DLC coated S30V stainless steel
• Handle material: Black textured G-10
• Blade length: 3 1/4 inches (8.25 cm)
• Closed length: 4 5/8 inches (11.75 cm)
• Weight: 6.2 oz
• In Stock: 10