Since 2004 Kershaw-Knives.net is one of the oldest and largest online catalogs of Kershaw merchandise. We are a stocking supplier with thousands of Kershaw knives in stock. We have laser engraving machines and commercial embroidery machines so personalize your order! Kershaw-Knives.net is an indepented reseller of Kershaw Knives, owned by Two Point Enterprise, LLC, and not affiliated with KAI USA, Ltd.
Click here to see the Kershaw 9 inch Curved Fillet Knife 1242GEX detail page. - Kershaw Curved Fillet Knife 1242GEX is just what you have been looking for. It is a 9 inch curved blade that is just waiting to fillet those fish up for you. This is perfect for breaking medium and large fish, game and meats to get them ready for your next meal. The curved blade allows you to cut all the way through and gives you the full range of motion needed in order to make a clean cut. This knife comes with a plastic sheath covering. The handle is a glass filled nylon with the K-Texture rubber overmold grip on top to help you keep this secured in your hand. Get this now and be prepared for you next fishing trip.
Top 16 selling Kershaw Knives in the past 24 hours!
Kershaw Launch 2 Automatic Knife 7200. Stone wash finished blade measuring 3.25 inches long. Opens with just one push of the red button. Black pocket clip on the back that can be changed to the front side. Made in the USA, an engraved "Going into battle" American flag is on the back side of the handle. Blade is made of CPM154 Steel.
Kershaw Emerson Knife 6030 CQC-10K. This knife has been designed by Emerson and built by Kershaw as a hunting survival knife. It has a Bowie-style blade ideal for hunting and has been built for the toughness, durability, and edge-holding capabilities your next hunting trip demands. The blade is 3.5 inches long and 1 inch wide, covered with a stone wash finish on front and back. The handle has the hunter green G-10 scales on front to help secure your grip while the back side is silver with a 410 bead- blasted finish so it is smooth in your palm. Handle is 4.75 inches long. Black pocket clip can be changed from left to right in a tip up position. Lanyard hold on handle. Frame lock system. Opens manual style and also with the wave shaped opening feature- the thumb disk- whick allows the blade to deploy when this disk runs over your pants pocket.
Blade Material: 8Cr14MoV steel with stonewashed finish
Blade length: 3.5 inches
Handle: Textured G-10 front, 410 bead-blasted finish back
Kershaw Composite Blackwash Leek 1660CBBW. Kershaw has gone and covered both the blade and handle completely in a Blackwash finish, so you will not be able to see any scratches on this knife at all! Then they have put the high grade of steel that is razor-sharp D2 on the cutting edge and then in a nic swirl fashion the metal changes to a Sandvik 14C28N steel on the spine. So the expensive steel is on the cutting edge where you need it most for the best performance and then it helps to keep the costs down for this knife. The pocket clip is also stone washed finished and can be changed from tip up to tip down. Frame lock system. Lanyard hole on handle with a tip-lock slider to prevent the blade from opening unexpectedly. This leek has it all!
Blade length: 3 inches
Blade material:CPM-D2 on the cutting surface and Sandvik 13C26 on the spine
Handle material: 410 stainless steel with Black wash finish
Be exclusive and one of a kind by owning for yourself a Kershaw Leek with an abalone adorned handle. At our facility in DeRidder, LA we cut abalone slabs with precision lasers and adorn the handle of these Kershaws. Abalone is a composite material made from crushed seashells. It is known for its beautiful colors and lustrious appearance. No two are alike!
Kershaw has teamed up with the Robertson Family to make an official Duck Commander knife. The Dunbar 7420DCX has an olive drab handle that is glass filled nylon. The bead blasted blade is a fine edge that is 3 inches long. The official Duck Commander logo is engraved on the front of the blade and each clam package will have a picture of one of the family members and the family picture on the back. The pocket clip is reversible for a deep carry on either the left or the right. A lanyard hole is on the end of the handle.
Kershaw Barstow 3960. Folding knife, yet deploys into a dagger! The Bar better watch out and move over because the Barstow is here in full effect. With the flip of the flipper, this 3 inch blade comes out with a slim and sleek blade with a very sharp spear tip end. The blade is made of 8Cr13MoV stainless steel with Kershaw’s BlackWash coating for a non-reflective that give it an “already-broken-in” look. Two cobalt blue tubers are on both ends of the dagger, this will keep your fingers off the blade and also add some nice color to this full black knife. Handle has glass-filled nylon and a neat design "X"d on it, handle alone measures 4 inches. Pocket clip is black and a deep carry, can be changed from left to right with only a tip up position. Liner lock sytem. Barstow- Let's do this Dagger style!
If the Chive is a little too small for you and the Leek a little to large, try this Scallion Frame Lock, model 1620FLST. This serrated version of the Kershaw Scallion Frame Lock has been a favorite since its relase in early 2008.
Blade length: 2.25 inches (5.8 cm)
Overall length: 5.75 inches (14.6 cm)
Blade material: bead blasted 420 high carbon stainless steel
The drop point blade of the Kershaw Clash 1605 knife is made of heat treated 8CR13MoV steel with a bead blasted finish. This powerful blade will hold an edge. The handle of the Clash is composed of polyimide with added texture for a steady gripping surface. This knife features the Kershaw Speed Safe opening system that is activated by the flipper on the back of the blade. The liner lock ensures that the blade stays in the open position. A pocket clip is included for easy carrying.
The Kershaw Zero Tolerance knife model 0350 is 10 percent smaller than the 0300 knife. This folding knife is assisted opening which is activated by using either the thumbstud or the flipper on the back of the handle. The blade is made of S30V steel and is coated in tungsten dlc. The handle is textured G-10 for good grip even in wet conditions. The pocket clip can be mounted on four places on the handle, giving you the option of carrying the knife tip up, tip down, left, or right.
Start your day off right by sliding this Kershaw Starter 1301BW into your pocket! Kershaw has blended the black wash rugged look with a stylish looking design on the black wash handle. The Starter has a 3.4 inch Stainless steel blade and handle with a black-oxide BlackWash™ finish for extra protection to this knife. There is a pocket clip on the back that is for a deep carry in your pocket. This Black wash will help to hide future scrates, we all need a little starter help on that, right?! Check out the nice scale design on this handle, made for eye catching appeal and also for a more steady grip.
Kershaw AM-6 2345. Wake up and literally put this knife around your neck. This is a neck knife. It comes with a lanyard cord that is long enough for any man's neck and then your AM-6 is ready to face your day, whatever what may come. The blade is 1 inch long and to the black handle it is 1.5 inches, overall length is 3.25 inches. The hard, black, kydex sheath that the blades slides and locks into place is 2.85 inches long. The blade is made of 8Cr13Mov steel with a stone washed finish. The handle is made of glass-filled nylon and measures 1.75 inches. Lanyard hole on end. Full tang construction. Ready for action.
Kershaw RJ Tactical 3.0 is a RJ Martin Design. It is all black and has some really neat curves to this knife. There is finger grooves on the handle and the handle itself has intersecting lines which sets this knife apart from the rest. The blade is three inches long and made of 8Cr13Mov steel. The handle is glass filled nylon and the pocket clip is reversible from left to right. Open this up with the finger switch on top and lock it into place with the liner lock system.
This Kershaw Ken Onion Leek, Model 1660, has a 440A stainless steel 3 inch blade with a 410 stainless steel handle. The Speed-Safe torsion bar assisted opening allows this knife to be opened with one push. When closed this 3.1 oz Kershaw knife is 4 inches long. This Leek is a Classic knife still Made in the USA.
Kershaw Emerson Design CQC-9K Knife 6045BLK. Kershaw and Emerson have heard the cries from you men- asking for a bigger knife. Well, you have got it, this is their version of big and oversized. You get plenty of Kershaw quality and plenty of Emerson style on this oversized knife. The blade is 3.6 inches with a black oxide coating over the big drop point blade. It is made of 8Cr13Mov stainless steel, which gives this blade exceptional wear resistance, hardness and good edge retention. See the slight recurve in the blade? This was made to improve the cuts around rounded material like zip ties, hose, and rope. The pocket clip can be interchanged from a left to right carry. Large lanyard hole on the end of handle. There is G-10 Scales on the front of the handle to help secure your grip, while the back of the handle is sleek and smooth with the black-oxide coating. Secure frame lock. Opens manually with the thumb disk or use this wave action on the side of your pant's pocket to easily open this blade up on it's way out of your pants. Sleek curves help this baby to fit right into the palm of your manly hands. Big just got better!
Blade length: 3.6 inches
Overall length: 8.8 inches
Blade Material: 8Cr14MoV, black-oxide coating
Handle Material: G-10 front, 410 black-oxide coated back
Weight: 6.4 oz
In Stock: more than 10
msrp $69.99 original price $36.45 additional 15% OFF ! $31.00
How about a tractor green Kersahw Leek? We are always on the quest to bring uniqueness to the knife market, and that is exactly what we are trying to do here. This Kersahw Leek has been disassembled in our facility and the tractor green enable added to both sides of the handle. The end result is this attractive tractor green Kershaw Leek. Who said only the tractor is sexy?
The Kershaw Zero Tolerance 0350TS has a black textured G10 handle to keep a firm grip. The blade is S30V stainless steel, proven for its durability and resistance to wear and corrosion. A Tungsten DLC coating has been applied in a distinct tiger stripe pattern to provide additional blade hardness. The blade has SpeedSafe assisted opening that can be initialized with the ambidextrous thumbstuds or the convenient flipper. The Kershaw Zero Tolerance 0350TS comes with a pocket clip that mounts four ways for right or left carrying in tip up or tip down position.
