Kershaw knives made in USA

This Kershaw Leek knife has the famous Gadsden artwork laser engraved on the handle. The coiled rattlesnake and the words, Don't Tread On Me, appear on either side of the snake. The Gadsden artwork was developed back before the revolutionary war when England commonly sent criminals to the USA instead of housing them in their own prison system. The newspaper featured the coiled snake with the suggestion that maybe we should send rattlesnakes to England in return to the criminals they were sending here. Since then the Gadsden message has become a piece of Americana and looks good on just about anything American, or made in the USA, just like this Kershaw Leek! Disclaimer: The artwork engraved upon this knife was not performed by the manufacturer and may not be the views expressed by the manufacturer.

• Blade length: 3 inches
• Closed length: 4 inches
• Blade material: Sandvik 14C28N
• Handle material: 410 stainless steel
• Weight: 3 oz
• In Stock: more than 10

The boron coated handle of this Kershaw Black Chive is one of the reasons this knife was choosen as Blade Magazine's Most Innovative American Design. This shiny black knife comes in a tin that doubles as a fancy gift wrapper and great storage container. Like all Kershaw Chives this knife features the speed safe opening with both the index finger opening on the spine and the ambidextrous thumb studs.

• In Stock: 6

The Kershaw Glass Breaker Blur model 1670GBBLKST is not only designed with the same popular Blur platform, but this particular model also has a glass breaker in the end. The blade is assisted opening and totally covered with a black dlc coating. The serrations are scallop style that are designed to cut rather than tear. The blade locks tight with a liner lock, and the T6 aluminum handle is comfortable with its Trac-Tec textured inserts.

• Blade length: 3.375 inches (8.6 cm)
• Closed length: 4.5 inches (11.3 cm)
• Blade material: Sandvik 14C28N with DLC coating
• Handle material: 6061-T6 aluminu with Trac-Tec inserts
• Weight: 4.2 oz
• In Stock: 1

The Kershaw model 1670S30V is known as the S30V Stone Washed Blur. This Kershaw Blur features a hard stone washed S30V blade. S30V is popular for its hardness and edge retention. The blade is assisted using the Kershaw SpeedSafe mechanism, and it is held and released by a liner lock in the handle. The handle is 6061-T6 anodized aluminum with Trac-Tec inserts for good grip.

• In Stock: 4

Using on the blade a composite of CPM-D2 on the cutting surface and Sandvik 13C26 on the spine, the Kershaw Composite Leek puts the expensive metal where it belongs. This conservative idea keeps the price of the knife affordable. Aside from that, it looks like the two metals together made a real good looking knife! This Kershaw 1660CB comes with a vinyl gift pouch.

• Blade length: 3 inches
• Closed length: 4 inches
• Weight: 3 oz
• In Stock: more than 10

The Kershaw Blur 1670DSBLK has a desert sand 6061-T6 anodized aluminum handle with a TracTech insert. The blade has a non-reflective coating over Sandvick 14C28N stainless steel. SpeedSafe assisted opening allows you to quickly, safely open the blade by using the dual thumbstuds. A liner lock secures the blade in place. The Kershaw Blur 1670DSBLK is built to last and is an outstanding choice for everyday carrying.

• Blade length: 3.375 inches (8.6 cm)
• Closed length: 4.5 inches (11.3 cm)
• Blade material: Sandvik 14C28N stainless steel
• Handle material: 6061-T6 desert sand anodized aluminum
• Weight: 4.2 oz
• In Stock: 5

The Kershaw 1880 Echelon is an original. Check out the G10 handle on this knife. This particular light green translucent color is how G10 looks in its natural form before it is colored. What makes the no-color handle look so neat with the Kershaw Echelon is that you can actually see the assisted opening mechanism inside the handle. Then to make the knife even more interesting Kershaw has removed the liners and inserted a small strip of steel inside the handle. This strip of steel serves as the liner lock to hold the knife open tight. The ambidextrous thumbstud on the knife is hollow which further adds to the one of a kind styling of the Kershaw Echelon.

• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.25 inches (18.4 cm)
• Sandvik 14C28N stainnless steel
• Handle material: machined G10
• Weight: 2.6 oz
• In Stock: more than 10

This Kershaw Ener-G flipper knife model 1740BLK has a flipper on the spine that enables you to open this knife fast, fast as an assisted opener. The design of the flipper is such that it builds up energy as you apply pressure which accelerates the blade as it opens. Once open a liner lock catches and holds the blade in place. This Kershaw 1740BLK model has a 410 stainless steel handle with G10 overlays.

• Blade length: 2.75 inches (7.5 cm)
• Overall length: 6.5 inches (17.3 cm)
• Blade material: 410 stainless steel with G10 overlays
• Blade material: Sandvik 14C28N stainless steel
• Weight: 2.6 oz

our price $54.99

The Kershaw Field knife model 1082 is part of the American Made Hunters line. This full tang fixed blade knife is constructed of Sandvik 14C28N steel. The handle has G10 scales for a user-friendly gripping surface. This is one highly functional knife that you are going to want in your camping gear for years to come. Use it for a wide variety of chores around the campsite such as preparing meals, dressing game, or cutting rope to name a few.

• Blade length: 3.75 inches (8.3 cm)
• Overall length: 7.25 inches (18.4 cm)
• Blade material: Sandvik 14C28N stainless steel
• Handle material: Black G10 overlays
• Weight: 2.6 oz
• In Stock: 5

The American made Kershaw Skinning Knife model 1080 has full tang Sandvik 14C28N stainless steel construction. Kershaw has managed to achieve a simplistic design in this knife that is highly effective. The G-10 scales of the handle allow the user to stabilize their grip for added control of the 2 3/8 inch blade. The knife weighs in at 2.2 ounces, making it comfortable to use. A leather sheath is included with the Kershaw Skinning Knife for safe carrying and storage.

• Blade length: 2.375 inches (6 cm)
• Overall length: 6 inches (15.2 cm)
• Blade material: Sandvid 14C28N stainless steel
• Handle material: G10 overlays
• Weight: 2.2 oz
• In Stock: 10

This Kershaw 1670SPGRN is among the coolest of the cool. It is a limited edition run of the Kershaw Blur that features a green aluminum handle with a spider web pattern on it. The knife is assisted opening using the ambidextrous thumbstuds and has a black tini coated blade. The core of the blade is made of high qualight cpm 154 steel. The knife is razor sharp, cool looking, and rare. What more could you ask for in a knife?

• Blade length: 3 3/8 inches (8.6 cm)
• Closed length: 4.5 inches (11.3 cm)
• Blade material: TiNi coated CPM154
• Handle material: green 6061-T6 anodized aluminum
• Weight: 4.2 oz
• In Stock: more than 10

This Kershaw Ken Onion Baby Boa, model 1585BR, has a 440A high polished stainless steel blade. This knife also features the famous Speed Safe Ken Onion design. The red and black smoked handle is made from 6061-T6 anodized aluminum. The closed length of this Kershaw knife is 2.75 inches, and the blade is 2 inches long. The overall weight is 1.7 oz.

• In Stock: more than 10

This Kershaw Ken Onion Blackout, Model 1550, has a ti-nitride coated 440A stainless steel 3.25 inch blade with a black polyamide handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.5 oz Kershaw knife is 4.5 inches long.

• In Stock: more than 10

This Kershaw Ken Onion Blackout, Model 1550ST, has a ti-nitride coated 440A stainless steel 3.25 inch serrated blade with a black polyamide handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.5 oz Kershaw knife is 4.5 inches long.

• In Stock: 3

This Kershaw Ken Onion Blur, Model 1670RD, has a 440A stainless steel 3 3/8 inch blade with a red anodized aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 4.2 oz Kershaw knife is 4.5 inches long.

• In Stock: 5

This Kershaw Ken Onion Blur, Model 1670BLK, has a black 440A tungsten DLC coated stainless steel 3 3/8 inch blade with a black anodized aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 4.2 oz Kershaw knife is 4.5 inches long.

• In Stock: 5

This Kershaw Ken Onion Blur, Model 1670BLKST, has a black 440A tungsten DLC coated stainless steel serrated 3 3/8 inch blade with a black anodized aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 4.2 oz Kershaw knife is 4.5 inches long.

• In Stock: 9

This Kershaw Ken Onion Leek, Model 1660, has a 440A stainless steel 3 inch blade with a 410 stainless steel handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.1 oz Kershaw knife is 4 inches long.

• Blade length: 3 inches
• Closed length: 4 inches
• Blade material: Sandvik 14C28N
• Handle material: 410 stainless steel
• Weight: 3 oz
• In Stock: more than 10

This Kershaw Ken Onion Leek, Model 1660CKT, has a black 440A tungsten DLC coated stainless steel 3 inch blade with a black 410A tungsten DLC coated stainless steel handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.1 oz Kershaw knife is 4 inches long.

• Blade length: 3 inches
• Closed length: 4 inches
• Weight: 3 oz
• In Stock: 9

This Kershaw Ken Onion Leek, Model 1660CKTST, has a black 440A tungsten DLC coated stainless steel serrated 3 inch blade with a black 410A tungsten DLC coated stainless steel handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.1 oz Kershaw knife is 4 inches long.

• Blade length: 3 inches
• Closed length: 4 inches
• Weight: 3 oz

retail $99.95
our price $49.99

This Kershaw Ken Onion Leek, Model 1660BR, has a 440A stainless steel 3 inch blade with a red aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.1 oz Kershaw knife is 4 inches long.

• Blade length: 3 inches
• Closed length: 4 inches
• Weight: 3 oz
• In Stock: 8

This Kershaw Ken Onion Leek, Model 1660ST, has a 440A stainless steel 3 inch blade with a 410 stainless steel handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.1 oz Kershaw knife is 4 inches long.

• Blade length: 3 inches
• Closed length: 4 inches
• Weight: 3 oz
• In Stock: more than 10

This Kershaw Ken Onion Scallion, Model 1620, has a 420HC stainless steel 2.25 inch blade with a T6 anodized aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 2.3 oz Kershaw knife is 3.5 inches long.

• Blade length: 2.25 inches (5.8 cm)
• Overall length: 5.75 inches (14.6 cm)
• Blade material: bead blasted 420 high carbon stainless steel
• Handle material: glass filled nylon (black)
• Weight: 2.3 oz
• In Stock: 6

This Kershaw Ken Onion Scallion, Model 1620BL, has a 420HC stainless steel 2.25 inch blade with a T6 anodized blue aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 2.3 oz Kershaw knife is 3.5 inches long. The Kershaw Scallion is slightly larger than the Kershaw Chive and a little smaller than the Kershaw Leek.

• Blade length: 2.25 inches (5.8 cm)
• Overall length: 5.75 inches (14.6 cm)
• Blade material: bead blasted 420 high carbon stainless steel
• Handle material: 6060-T6 anodized aluminum with blue coating
• Weight: 2.3 oz
• In Stock: 9

This Kershaw 1620GRN Green Scallion knife has the Ken Onion speedsafe opening system, a 420HC stainless steel 2.25 inch blade with a T6 anodized green aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 2.3 oz Kershaw knife is 3.5 inches long. The deep green color on the handle of this knife makes it a really good looking knife, especially if this one is to become your edc!

• Blade length: 2.25 inches (5.8 cm)
• Overall length: 5.75 inches (14.6 cm)
• Blade material: bead blasted 420 high carbon stainless steel
• Handle material: 6060-T6 anodized aluminum with green coating
• Weight: 2.3 oz
• In Stock: more than 10

This Kershaw Ken Onion Scallion, Model 1620RD, has a 420HC stainless steel 2.25 inch blade with a T6 anodized red aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 2.3 oz Kershaw knife is 3.5 inches long.

• Blade length: 2.25 inches (5.8 cm)
• Overall length: 5.75 inches (14.6 cm)
• Blade material: bead blasted 420 high carbon stainless steel
• Handle material: 6060-T6 anodized aluminum with red coating
• Weight: 2.3 oz
• In Stock: 7

This Kershaw Ken Onion Scallion, Model 1620ST, has a 420HC stainless steel 2.25 inch serrated blade with a T6 anodized aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 2.3 oz Kershaw knife is 3.5 inches long.

• Blade length: 2.25 inches (5.8 cm)
• Overall length: 5.75 inches (14.6 cm)
• Blade material: bead blasted 420 high carbon stainless steel
• Handle material: glass filled nylon (black)
• Weight: 2.3 oz
• In Stock: 5

Kershaw knives are made in the USA. The Kershaw Shallot, model 1840, is no different. As the largest member of the Leek-Chive family, the Kershaw Shallot also features the Ken Onion speedsafe index finger opening. One push on the lever on the spine of this knife, and the blade comes flying out in a hurry. If you're wondering what it's like to hold this knife, imagine holding an oversized Leek - very fulfilling, like you've found the knife you've always been looking for.

• In Stock: 3

This Kershaw Ken Onion Tactical Blur, Model 1670TBLKST, has a 440A Tungsten DLC coated stainless steel 3 3/8 inch serrated Tanto blade with a black anodized aluminum handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 4.2 oz Kershaw knife is 4.5 inches long.

• In Stock: 5

This Kershaw Ken Onion Whirlwind, Model 1560, has a 440A stainless steel 3.25 inch blade with a black polyamide handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.5 oz Kershaw knife is 4.5 inches long.

• In Stock: 5

This Kershaw Ken Onion Whirlwind, Model 1560ST, has a 440A stainless steel 3.25 inch serrated blade with a black polyamide handle. The Speed-Safe torsion bar assisted opening allow this knife to be opened with one push. When closed this 3.5 oz Kershaw knife is 4.5 inches long.

• In Stock: 7

The Kershaw Knockout model 1870 knife is built upon a unique idea, to make a big knife that is light enough to be an everyday carry. This knife comes pretty close. The Kershaw Knockout comes with a modified drop point stonewashed Sandvik 14C28N blade that is large. The handle is all aluminum except for the framelock itself. The framelock feature of this knife is where the Knockout got its name. Kershaw literally knocked out a part of the aluminum frame and replaced it with stainless steel so the blade locks securely. Essentially what this did was lighten the knife substantially by not having to use all stainless steel on a framelock knife. Then once that was done Kershaw added an assisted opening feature that can be activated using either the thumbstud on the blade of the flipper on the spine. The end result is a made-in-USA, big, light-weight,assisted-opening knife. We like this one.

• Blade material: stoned washed Sandvik 14C28N
• Handle material: aluminum with stainless steel frame lock
• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.875 inches (20 cm)
• Weight: 3.4 oz
• In Stock: more than 10

The Kershaw Leather Sheath model 1050L has the high quality construction customers have come to expect from Kershaw. It features premium leather with heavy duty stitching. The Kershaw name is proudly emblazoned on the front flap. It has a snap closure and a loop for horizontal carrying. The sheath accommodates Kershaw knife sizes like the Black Horse II, Wildcat Ridge, Blackout, Wirlwind, Boa, and Vapor II models.

our price $12.99

The Kershaw Mini Skinner model 1081 is the smaller version of the Skinner knife. It features a shorter 2 inch full tang blade. Some hunters like the knife for cleaning smaller game. Other hunters like the Mini Skinner as their primary skinning knife even for large game because it allows them better control of the knife. The handle has G-10 textured overlays for a nice grip as well as good looks. A leather sheath is included for carrying on your belt. Th Kershaw Mini Skinner is made in USA.

• Blade length: 2 inches (5 cm)
• Overall length: 4.75 inches (12 cm)
• Blade material: Stonewashed Sandvik 14C28N
• Handle material: black textured G10 overlays
• Weight: 1.6 oz
• In Stock: 2

The Kershaw Blur 1670OLBLK is an assisted opening knife with a clip point blade. The 3 3/8 inch blade is constructed of Sandvik 14C28N stainless steel with a non-reflective black coating. The handle is olive drab 6061-T6 anodized aluminum with TracTech inserts for stable gripping. Opening the Kershaw Blur is a breeze. The blade is kept in place with a liner lock. A pocket clip is included for carrying.

• Blade length: 3.375 inches (8.6 cm)
• Closed length: 4.5 inches (11.3 cm)
• Blade material: Sandvik 14C28N stainless steel
• Handle material: Olive Drab 6061-T6 anodized aluminum
• Weight: 4.2 oz
• In Stock: 4

The safety orange G10 scales handle of the Kershaw Field Knife 1082OR makes it easy to keep up with, which is a good thing because you are not going to want to let this one out of your sight. The durable full tang construction is amplified with the use of Sandvik 14C28N steel. The simple yet functional design combines a solid, strong blade with great gripping surface. It is sure to make this the preferred knife for all of your outdoor activities.

• Blade length: 3.75 inches (8.3 cm)
• Overall length: 7.25 inches (18.4 cm)
• Blade material: Sandvik 14C28N stainless steel
• Handle material: Orange G10 overlays
• Weight: 2.6 oz
• In Stock: 4

The bright orange color of the Kershaw Orange Skinning Knife 1080OR makes it highly visible, which comes in handy if you need to lay it down in the middle of a task. The full tang fixed blade knife is made from Sandvik 14C28N with G10 overlays for a durable gripping surface. Ridges along the back of the blade provide a stable area for applying pressure or guidance with the thumb. A leather sheath is included with the 1080OR Skinning Knife.

• Blade length: 2.375 inches (6 cm)
• Overall length: 6 inches (15.2 cm)
• Blade material: Sandvik 14C28N
• Handle material: orange G10 overlays
• Weight: 2.2 oz
• In Stock: 7

The Kershaw model 1665ST is the partially serrated version of the Kershaw Packrat knife. It has a 14C28N stainless steel blade with a handle that has G-10 overlays. The blade is assisted for fast opening, and is held in place by a liner lock in the handle. A reversible pocket clip is included that allows you to mount the knife tip-up or tip-down.

• In Stock: 9

The Kershaw Piston model 1860 is a larger sized knife but does not weigh more because the stainless steel liners are removed. Since the entire handle is made of G10, enough strength exists in the handle to remove the liners. Then to keep the liner lock functionality, a small stainless steel piece was installed into the handle. This moves behind the blade to keep it open tight when in use. It releases just the same as an ordinary liner lock. Another cool feature of the Kershaw Piston is that you can mount the pocket clip on four different places on the knife, resulting in four carrying options. A concealed lanyard attachment is located in the handle. This will allow you to attach your lanyard discreetly without interrupting the chiseled lines of this knife.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.5 inches (21.6 cm)
• Sandvik 14C28N stainnless steel with satin finish
• Handle material: machined G10
• Weight: 4 oz
• In Stock: 7

This Kershaw Ken Onion Rainbow Leek, Model 1660VIB, has a titanium oxide coated 440A stainless steel 3 inch blade and handle. The rainbow colors are created by passing currents of electricity over the coating using varying intensities. The Speed-Safe torsion bar assisted opening allows this knife to be opened with one push. When closed this 3.1 oz Kershaw knife is 4 inches long.

• Blade length: 3 inches
• Closed length: 4 inches
• Weight: 3 oz
• In Stock: 5

The distinctive finish of the Kershaw Ken Onion Rainbow Scallion 1620VIB is achieved when the titanium oxide coating is applied to the 420HC stainless steel blade and 410 stainless handle. SpeedSafe opening technology allows fast, reliable opening for both right and left handed users. Safety features include a liner lock system to ensure that the blade remains in position until the user releases it, as well as a tip lock that prevents the knife from opening when carried or stored. Additional features of the Rainbow Scallion 1620VIB include dual thumb studs, a removable carrying clip, and a gift bag.

• Blade Length: 2.25 inches (5.8 cm)
• Closed Length: 3.5 inches (8.4 cm)
• Blade material: 420HC with titanium oxide rainbow coating
• Handle material: 410 stainless with titanium oxide coating
• Weight: 2.3 oz
• In Stock: 4

There is no knife like the Kershaw Rake model 1780CB. What makes this knife stand out against other wannabes is the composite blade with a curved belly. The curve in the belly makes the knife great for slashing and slicing. High quality D2 steel is on the cutting edge of the blade while reliable Sandvik 14C28N makes up the remainder of the blade structure. Textured G-10 overlays and steel liners are what the handle is made of. As far as performance, the Kershaw Rake is assisted opening with the help of both ambidextrous thumbstuds and a flipper on the spine. And even better, this knife was MADE IN THE USA.

• Blade length: 3.5 inches (8.9 cm)
• Overall length: 8.125 inches (20.6 cm)
• Blade material: CPM-D2 and Sandvik 14C28N
• Handle material: textured G-10
• Weight: 4.8 oz
• In Stock: 10

The Kershaw Random Leek, model 1660TGRYST, has two special features that set it aside from other Leek models. It is constructed of high quality S30V stainless steel, and it has a reverse tanto blade. The non-reflective grey color of the Random Leek is great for the simplest of things like hiding dirt and grime. This same grey chrome nitride coating can also be a lifesaver in tactical operations. If you're into highly practical knives and have a taste for high quality steel, try out the Random Leek.

• Blade length: 3 inches
• Closed length: 4 inches
• Weight: 3 oz
• In Stock: more than 10

A production version of the widely popular Ken Onion original design, the Kershaw Random Task II 1515 has a stonewashed Sandvik 14C28N plain edge blade. The handle has textured G10 scales for added grip. Dual thumbstuds provide ambidextrous deployment of the Speed Safe assisted opening system.

• Blade material: Sandvik 14C28N with stonewashed finish
• Handle material: textured G-10
• Blade length: 3.25 inches (8.25 cm)
• Closed length: 4.5 inches (11.4 cm)
• Weight: 3.8 oz
• In Stock: more than 10

The Kershaw Random Task II 1515ST has a partially serrated Sandvik 14C28N stainless blade that is suitable for a wider variety of chores than a plain edge. Quick one-handed opening is set in motion with dual thumbstuds and completed using Kershaw SpeedSafe technology. The black, textured G10 scales provide a solid gripping surface. A reversible pocket clip is included with the Kershaw Random Task 1515ST.

• Blade material: Sandvik 14C28N with stonewashed finish
• Handle material: textured G-10
• Blade length: 3.25 inches (8.25 cm)
• Closed length: 4.5 inches (11.4 cm)
• Weight: 3.8 oz
• In Stock: more than 10

The Kershaw Salvo 2445 has Trac-Tech inserts on the front (non-clip) sideof the handle for non-slip gripping. The back of the 410 stainless steel handle is left bare to allow you to easily slip it in and out of your pocket with ease. The three inch blade is Sandvik 14C28N steel and features dual thumb studs for smooth, one-handed opening that is convenient for both left and right handed users. The Kershaw Salvo is MADE IN THE USA.

• Blade length: 3 inches (7.6 cm)
• Overall length: 6.875 inches (17.5 cm)
• Blade material: Sandvik 14C28N
• Handle material: 410 stainless steel w/ Trac-Tec inserts
• Weight: 3.1 oz
• In Stock: 6

For those of you who like to keep it camo-consistent, you might try the Kershaw Scallion Camo knife model 1620C. On the anodized aluminum handle of this knife is a Realtree camouflage pattern. The blade is assisted opening when you push the ambidextrous thumbstuds and is made of 420HC stainless steel. A safety lock is integrated into the handle so that the knife cannot open accidentally. A pocket clip is included as a means to carry the knife.

• Blade length: 2.25 inches (5.8 cm)
• Closed Length: 3.5 inches
• Blade Material: 420HC Stainless Steel
• Handle Material: 6061-T6 anodized aluminum with Camouflage pattern
• Weight: 2.3 oz

retail $79.95
our price $39.99

The Kershaw Scallion 1620FL is unique because it is a frame lock version of the Scallion models. This knife comes in a gray 410 stainless steel handle and a 420HC stainless steel fine edge blade. The size of this knife is slightly larger than the Chive and smaller than the Leek. Some say the size is just right.

• Blade length: 2.25 inches (5.8 cm)
• Overall length: 5.75 inches (14.6 cm)
• Blade material: bead blasted 420 high carbon stainless steel
• Handle material: bead blasted 410 stainless steel
• Weight: 2.9 oz
• In Stock: more than 10

If the Chive is a little too small for you and the Leek a little to large, try this Scallion Frame Lock, model 1620FLST. This serrated version of the Kershaw Scallion Frame Lock has been a favorite since its relase in early 2008.

• Blade length: 2.25 inches (5.8 cm)
• Overall length: 5.75 inches (14.6 cm)
• Blade material: bead blasted 420 high carbon stainless steel
• Handle material: bead blasted 410 stainless steel
• Weight: 2.9 oz
• In Stock: 5

The Kershaw 1620PINK Pink Scallion knife features a straight edge blade and handle made of pink anodized aluminum. If pink is your color then this one is for you. Being just the right size for a pocket or a purse, the Kershaw Pink Scallion features an assisted blade that is activated by pushing the lever on the spine. When closed the blade is held in place by a safety integrated into the handle.

• Blade length: 2.25 inches (5.8 cm)
• Overall length: 5.75 inches (14.6 cm)
• Blade material: bead blasted 420 high carbon stainless steel
• Handle material: 6060-T6 anodized aluminum with pink coating
• Weight: 2.3 oz
• In Stock: 3

If you are the type that misplaces your knife and needs it to call out to you when you lose it then you might try this yellow Kershaw Scallion model 1620YL. It is just like all of the other USA made Scallions with the exception that it has a bright yellow handle. This makes the knife stand out a little more amongst the clutter or in low-light conditions. The Kershaw Scallion has an assited opening blade that is locked with a liner lock in the handle. A pocket cliip is mounted on the knife for easy carrying inside the pocket or out.

• Blade Length: 2.25 inches (5.8 cm)
• Closed Length: 3.5 inches (8.4 cm)
• Blade material: 420HC stainless steel
• Handle material: bright yellow glass filled nylon
• Weight: 2.3 oz
• In Stock: 6

The Kershaw Speedform II 3550 comes shaving sharp right out of the box. The blade is made out of a material called ELMAX. ELMAX is a powdered steel that is known for its resistance to corrosion and excellent edge retention. More technically, ELMAX is also known for its low amount of non-metallic inconsistencies, its even distribution of carbides, and its ability to be hardened to 60+ on the Rockwell Hardness Scale. The Kershaw Speedform II is made and USA and you are sure to feel quality in your hands when you hold it.

• Blade length: 3.25 inches (8.3 cm)
• Overall length: 7.375 inches (18.7 cm)
• Blade material: ELMAX
• Handle material: machined G-10
• Weight: 3.2 oz
• In Stock: 9

This Kershaw Tilt Stone Washed knife model 4001SW is a limited edition knife with lots of great features. It has a dual component blade that has Vanax 75 on the cutting edge, which is laminated to a 420 stainless steel core. One side of the handle is a titanium frame lock while the other site is scaled with carbon fiber. The hinge of this knife features a roller bearing that is certainly noticeable when you use the flipper on the spine. Even though the knife is a manual opener, it glides open with speed and authority. This is the only one we have in stock, and it is numbered #397.

• Blade length: 4 inches
• Closed length: 5.5 inches
• Blade material: Vanax 75 cutting edge / 420 stainless steel
• Handle material: carbon fiber / titanium
• Weight: 4.8 oz

our price $499.99

The Kershaw Turbulence 1790 has a modified drop point blade with an upswept design that extends the cutting surface. It is constructed of Sandvik 14C28N stainless steel and features a stonewashed finish. The knife has SpeedSafe assisted opening that is initiated with the dual thumbstuds or the integrated flipper. The blade is secured into position with a liner lock mechanism. The handle of the Turbulence 1790 tapers somewhat toward the back. This allows better gripping of the pinky and ring fingers for better control of the knife. Black, textured G10 scales provide a steady gripping surface.

• Blade length: 3.25 inches (8.25 cm)
• Overall length: 7.75 inches (19.7 cm)
• Blade material: Stonewashed Sandvik 14C28N
• Handle material: textured G-10
• Weight: 4.4 oz
• In Stock: 10

This Kershaw Zero Tolerance Bayonet model ZT-9 is built from a full tang, 0.25 inch thick piece of S30V stainless steel. The handle is made of textured G10 to give you good grip even when it is wet. A high-impact polymer sheath is included that can allow the bayonet to be mounted in an up or down position.

• Blade material: stoned washed S30V stainless steel
• Handle material: textured G10, ranger green color
• Blade length: 7.5 inches (19 cm)
• Overall length: 12.3 inches (31.27 cm)
• Weight: 19.4 oz
• In Stock: 6

This black ballistic nylon sheath was design specifically for the Kershaw Zero Tolerance folding knives. This sheath is a geniune Zero Tolerance brand and fits on your belt loop with a snap. The front of the sheath has the Zero Tolerance logo and a flap that is secured with velcro.

• Sheath material: ballistic nylon
• Sheath length: 5.5 inches
• Sheath width: 2 inches
• Sheath color: black
• Weight: 1.4 oz
• In Stock: 10

The Kershaw Zero Tolerance Boot Knife model 0150 has a double-edged S30V blade with a blood groove on both sides. The blade is full tang for maximum strength. The handle is machined G-10 for good grip even in wet conditions. The sheath is MOLLE compatible, allowing you to attach the boot knife a variety of different ways.

• Blade material: S30V stainless steel
• Handle material: G10
• Blade length: 3 5/8 inches (9.2 cm)
• Overall length: 7.5 inches (19.0 cm)
• Weight: 3.6 oz

our price $148.00

This Kershaw Zero Tolerance Combat Knife 0170 has a 5.7 inch fixed blade. A Tungsten DLC coating has been applied over the durable 14C28N steel to give it a tactical non-reflective quality. The handle of the 0170 is matte black G10 that has been 3D machined to provide a superior gripping surface. The overall length is 11.5 inches, and it weighs in at 11 ounces. A Kydex sheath is included with the 0170.

• Blade material: 14C28N stainless steel
• Handle material: G10
• Blade length: 5.7 inches (14.4 cm)
• Overall length: 11.5 inches (29.2 cm)
• Weight: 11 oz
• In Stock: 4

This Kershaw Zero Tolerance foliage green colored sheath was designed to perfectly fit the Zero Tolerance folding knives. A wide velcro attachment holds down the flap on the sheath, and the belt clip on the back can be snapped on your belt. The snap comes in handy because you do not have to worry about feeding a belt through it. Just snap the sheath around whatever you want to attach it to and you are done. This sheath is made of ballistic nylon.

• Sheath material: ballistic nylon
• Sheath length: 5.5 inches
• Sheath width: 2 inches
• Sheath color: foliage green
• Weight: 1.4 oz
• In Stock: 7

The Kershaw Zero Tolerance combat folder model 0300 has a big S30V stainless steel blade that is assisted opening. The blade has a black tungsten dlc coating to reduce friction drag and enhance corrosion resistance. The handle is made of G-10 and has scales on it for even better grip. The blade uses a hex nut at the pivot to make it easy to adjust in the field using common tools. The Kershaw Zero Tolerance 0300 comes with a pocket clip that can be mounted in four places, tip up or town, left-handed or right-handed. MADE IN THE USA.

• Blade material: Tungsten DLC coated S30V stainless steel
• Handle material: Titanium with texured G10 overlay
• Blade length: 3.75 inches (9.5 cm)
• Overall length: 8.5 inches (21.6 cm)
• Weight: 8 oz
• In Stock: 3

The Kershaw Zero Tolerance 0300ST combat folder knife has a partially serrated S30V blade with a tungsten dlc coating. The tungsten dlc gives it the distinctive blade non-reflective look and helps with corrosion resistance. This knife is assisted opening and can be deployed using either the ambidextrous thumbstuds or the flipper on the back of the handle. The handle has 3D machined textured G-10 for excellent gripping power. This knife is MADE IN THE USA.

• Blade material: Tungsten DLC coated S30V stainless steel
• Handle material: Titanium with texured G10 overlay
• Blade length: 3.75 inches (9.5 cm)
• Overall length: 8.5 inches (21.6 cm)
• Weight: 8 oz
• In Stock: more than 10

The ranger green version of the Kershaw Zero Tolerance combat folder line has a green G-10 handle with textured scales. The S30V blade is assisted opening and has a striped camouflage pattern on top of a tungsten dlc coating. The ambidextrous thumbstuds and flipper on the spine are oversized a little so you can deploy the blade even when you have gloves on. This Kershaw Zero Tolerance 0301 model has a quad pocket clip mounting system, meaning that you can mount the clip on either side of the knife, tip up or tip down.

• Blade material: Striped tungsten DLC coated S30V stainless steel
• Handle material: Ranger green texured G-10 overlay
• Blade length: 3.75 inches (9.5 cm)
• Closed length: 5.25 inches (13.3 cm)
• Weight: 8.6 oz
• In Stock: 4

The Zero Tolerance 0301ST by Kershaw is a tough knife, and it shows. The partially serrated S30V stainless steel blade has been coated with Tungsten DLC in a tiger stripe pattern that stands up to the triple threat of dulling, wearing, and corroding. The handle has a Ranger green G-10 overlay that is deeply textured for ultra superior gripping. A generous finger guard and a thumb rest along the top of the handle allow you to choke up on the knife for added control. The Kershaw Zero Tolerance 0301ST has SpeedSafe opening technology. Enjoy single handed, ambidextrous opening via the dual thumb studs or the flipper. A removable, reversible carrying clip is included.

• Blade material: Striped tungsten DLC coated S30V stainless steel
• Handle material: Ranger green texured G-10 overlay
• Blade length: 3.75 inches (9.5 cm)
• Closed length: 5.25 inches (13.3 cm)
• Weight: 8.6 oz
• In Stock: 8

The Kershaw Zero Tolerance knife model 0350 is 10 percent smaller than the 0300 knife. This folding knife is assisted opening which is activated by using either the thumbstud or the flipper on the back of the handle. The blade is made of S30V steel and is coated in tungsten dlc. The handle is textured G-10 for good grip even in wet conditions. The pocket clip can be mounted on four places on the handle, giving you the option of carrying the knife tip up, tip down, left, or right.

• Blade material: Tungsten DLC coated S30V stainless steel
• Handle material: Black textured G-10
• Blade length: 3 1/4 inches (8.25 cm)
• Closed length: 4 5/8 inches (11.75 cm)
• Weight: 6.2 oz
• In Stock: 5

The Kershaw Zero Tolerance 0350ST knife is a tad bit smaller and lighter than the full blown model 0300. It has a partially serrated S30V blade and a G-10 handle that is textured on both sides. This knife is assisted opening and can be opened using either the ambidextrous thumbstuds or the blade protrusion on the back. The thumbstuds and the protrusion are enlarged a little so you can easily open the knife even when you are wearing gloves. A tungsten dlc coating is on the blade that helps with reducing corrosion and friction drag. The Kershaw Zero Tolerance 0350ST knfie is MADE IN THE USA.

• Blade material: Tungsten DLC coated S30V stainless steel
• Handle material: Black textured G-10
• Blade length: 3 1/4 inches (8.25 cm)
• Closed length: 4 5/8 inches (11.75 cm)
• Weight: 6.2 oz
• In Stock: 5

The Kershaw Zero Tolerance 0200 is the Military Folder knife. It has a 154CM stainless steel blade that is coated in Tungsten DLC. The blade has a recurve shape to it and a point that is perfectly centered with the handle. The 0200 can be opened with one hand using either the flipper on the back or the ambidextrous thumbstuds on the blade. A liner lock holds and releases the blade. The handle is made of 3D machined G-10 for good grip.

• Blade material: Tungsten DLC coated 154CM stainless steel
• Handle material: 3D machined G-10
• Blade length: 3 7/8 inches (9.8 cm)
• Closed length: 5.25 inches (13.3 cm)
• Weight: 7.7 oz
• In Stock: 2

The Kershaw Zero Tolerance model 0200ST is a non-assisted, partially serrated Military Folder knife. Is has a high quality 154CM stainless steel blade that is coated in Tungsten DLC. With a little practice one can open this knife swiftly with one hand. The handle has G10 overlays for good grip, and a liner lock holds and releases the blade.

• Blade material: Tungsten DLC coated 154CM stainless steel
• Handle material: 3D machined G-10
• Blade length: 3 7/8 inches (9.8 cm)
• Closed length: 5.25 inches (13.3 cm)
• Weight: 7.7 oz
• In Stock: 2

The Kershaw Zero Tolerance military knife model 0100 has a recurve shaped blade that is designed for minimal mass. The point of the knife is centered perfectly for piercing, and its CPM3V tool steel construction prevents against chipping and breaking from impact. A tungsten dlc coating has been applied to the blade to give it a non-reflective look while reducing friction and corrosion. The handle is made of 3D machine G10 for maximum grip even in wet conditions. A sheath is included that allows you to mount the knife in a variety of different configurations.

• Blade material: Tunsten DLC coated CPM3V tool steel
• Handle material: 3D machined G-10
• Blade length: 5.75 inches (13.6 cm)
• Overall length: 10.5 inches (26.7 cm)
• Weight: 11.4 oz
• In Stock: 6

If you are looking for a Zero Tolerance model that is easy to see then this Zero Tolerance model 0350OR ought to fit the bill. With a bright orange textured G-10 handle, this knife makes easy visibility of itself even in low-light conditions. Aside from the orange handle this knife is everything you expect from the high qualight line of Zero Tolerance knives. Its S30V blade, assisted opening, and made-in-usa craftsmanship assure that this knife is going to be with you a long, long time.

• Blade length: 3.25 inches (8.25 cm)
• Overall length: 7.75 inches (19.7 cm)
• Blade material: S30V stainless steel
• Handle material: Textured Orange G10
• Weight: 5.6 oz
• In Stock: more than 10

The Kershaw Zero Tolerance model 0121 is a full-tang, fixed-blade military knife with an S30V stainless steel blade. A tungsten dlc coating covers the blade making it non-reflective and corrosion resistant. A cord cutter is located in the choil of the blade thus making sure it is out of the way, yet easy to get to. The ranger green handle is made from textured G-10 and has a lanyard hole drilled in the end. A Kydex sheath comes with the Kershaw 0121 that is MOLLE compatible, making the knife able to be carried in different configurations.

• Blade material: Tungsten DLC coated S30V stainless steel
• Handle material: Texured G10 overlay
• Blade length: 4 1/4 inches (10.8 cm)
• Overall length: 8 inches (20.3 cm)
• Weight: 9.1 oz
• In Stock: 5

The blade of the Kershaw Zero Tolerance Rick Hinderer 0550 knife is stonewashed S35VN, which is highly resistant to wear and chipping. Opening this impressive blade is convenient with the use of dual thumb studs. The blade secures with a frame lock. The handle material is G-10 and is textured for increased gripping power. The Zero Tolerance Rick Hinderer 0550 has top quality materials and durable design to take use and abuse for years. Carry it proudly tip up or tip down, right handed or left handed.

• Blade material: S35VN
• Handle material: Textured G-10
• Blade length: 3.5 inches (8.8 cm)
• Overall length: 8.125 inches (20.6 cm)
• Weight: 5.8 oz
• In Stock: 3

The Kershaw ZT Hinderer 0560 knife has a corrosion resistant, wear resistant ELMAX powdered steel blade in a stonewashed finish. The handle is titanium that has a stonewashed, 3D machined pattern on the back and a matching black, G-10 3D machined scale on the front. The handle has a generous finger guard and grip. Ridges along the top of the handle extend into the blade for greater control of the knife. The blade is opened with the flipper or dual thumb studs. A KVT ball bearing system ensures smooth, fast deployment. The Kershaw Zero Tolerance Hinderer 0560 comes with a deep carry pocket clip that allows for left or right carrying with the tip up or down.

• Blade material: ELMAX w/ stonwashed finish
• Handle material: Textured G-10, machined titanium
• Blade length: 3.75 inches (9.5 cm)
• Overall length: 8.8 inches (22.4 cm)
• Weight: 5.8 oz
• In Stock: 7

This Kershaw Zero Tolerance Rick Hinderer model 0561 is about as perfect as a knife can get. With a desert sand colored G10 grip on one side, and a machined titanium grip on the other, this knife looks cool and unique at the same time. The pocket clip on the handle is able to be mounted on four sides: left, right, tip up, tip down. The blade is made from a material called ELMAX wish has high resistance to wear and corrosion. The blade is opened using either the ambidextrous thumbstuds or the flipper on the spine. Inside the hinge of this knife is roller bears which help the blade open smooth and fast.

• Blade material: ELMAX w/ stonwashed finish
• Handle material: Textured G-10, machined titanium
• Blade length: 3.75 inches (9.5 cm)
• Overall length: 8.8 inches (22.4 cm)
• Weight: 5.8 oz
• In Stock: more than 10

The Kershaw Zero Tolerance Shifter knife model 0160 is a full tang, fixed blade combat knife. The 5 inch blade has Tungsten DLC coating over 14C28N steel. The handle has textured G-10 scales suitable for all weather conditions, including extreme temperatures. Finger grooves in the handle and ridges along the tang provide added stability to your grip. The overall length of the 0160 is 10 inches with a weight of 8 ounces. It comes with a Kydex sheath.

• Blade material: Tungsten DLC coated 14C28N
• Handle material: G10, 3D machined
• Blade length: 5 inches (12.7 cm)
• Overall length: 10 inches (25.4 cm)
• Weight: 8 oz
• In Stock: 3

The Kershaw JB2 Shroud Cutter has a 270 degree cutting blade that is accessed through a 0.34 inch opening. This rescue device was designed to cut only where cutting needs to be done while keeping everything else undamaged. The shroud cutter is perfect for cutting cord, laces, and clothes from injured victims. An oxygen tank wrench, a glass breaker, and a hex head slip wrench are integrated into the tool to make it even more useful.

• Blade material: Sandvik 14C28N w/ tungsten dlc coating
• Handle material: Sandvik 14C28N w/ tungsten dlc coating
• Overall length: 6 inches
• Glass breaker material: carbide
• Weight: 2.4 oz
• In Stock: 3

The Zero Tolerance Shroud Cutter model JB1 from weighs only 2.4 ounces, making it a lightweight addition to your gear. It is constructed of 154CM stainless steel with an overlay of matte black Tungsten DLC. A 270 degree unexposed cutting surface with a .34 inch opening easily cuts through cording, rope, or clothing, and many other materials. Notches for your index finger and thumb stabilize help stabilize the tool as you work. Oxygen wrench cutouts are integrated into the handle. This model comes complete with a MOLLE compatible ballistic nylon sheath.

• Blade material: Sandvik 14C28N w/ tungsten dlc coating
• Handle material: Sandvik 14C28N w/ tungsten dlc coating
• Overall length: 6 inches
• Glass breaker material: carbide
• Weight: 2.4 oz
• In Stock: 3

The Kershaw Zero Tolerance 0350TS has a black textured G10 handle to keep a firm grip. The blade is S30V stainless steel, proven for its durability and resistance to wear and corrosion. A Tungsten DLC coating has been applied in a distinct tiger stripe pattern to provide additional blade hardness. The blade has SpeedSafe assisted opening that can be initialized with the ambidextrous thumbstuds or the convenient flipper. The Kershaw Zero Tolerance 0350TS comes with a pocket clip that mounts four ways for right or left carrying in tip up or tip down position.

• Blade material: TigerStripe Tungsten DLC coated S30V stainless steel
• Handle material: Black textured G-10
• Blade length: 3 1/4 inches (8.25 cm)
• Closed length: 4 5/8 inches (11.75 cm)
• Weight: 6.2 oz
• In Stock: 1

The Kershaw Zero Tolerance 0700 features an extra wide tanto blade constructed of S30V steel with a stonewashed finish. The integrated flipper makes opening the blade a cinch. The weight of the blade is offset by the lightweight G10 scales. This reduces the total weight to an easily managed 4.2 ounces. The Kershaw ZT 0700 comes with a reversible pocket clip.

• Blade material: stonewashed S30V
• Handle material: Textured G-10
• Blade length: 3.5 inches (8.8 cm)
• Overall length: 8.125 inches (20.6 cm)
• Weight: 4.2 oz
• In Stock: more than 10

The Kershaw Zing 1735 has a high quality blade made from Sandvik 14C28N that is machine grooved with a 3-D striated pattern. There are two ways to open the knife. Use the contoured thumbstuds for a normal opening or use the flipper on the back for a lightning fast opening. A liner lock holds and releases the blade. The handle is made from black polyimide and has a pocket clip that can be mounted on either end of the knife.

our price $29.99

Molon Labe, means "Come and Take". This phrase was used back when the Spartans were up against the overwhelming strength of the Persian army. Although outnumbered tremendously, the Spartans held off the Persian army long enough for their people to escape the city. Even though the Spartans were defeated the moral victory that came through this fight has stuck throughout the ages. Since then generals over history have rallied their troops when faced with similar circumstances. One more recent battle that comes to mind is the Battle of the Alamo, where Molon Labe philosophy one again repeated itself. Even more recently, Molon Labe, is an adopt phrase for those that support their 2nd Amendment rights to bear arms. Molon Labe, come and take it!

• Blade length: 3 inches
• Closed length: 4 inches
• Blade material: Sandvik 14C28N
• Handle material: 410 stainless steel
• Weight: 3 oz
• In Stock: more than 10